首页 | 本学科首页   官方微博 | 高级检索  
     

局部沸腾液滴内部气泡动态行为研究
引用本文:胡定华,邱晗,李强. 局部沸腾液滴内部气泡动态行为研究[J]. 工程热物理学报, 2021, 42(4): 1026-1031
作者姓名:胡定华  邱晗  李强
作者单位:南京理工大学电子设备热控制工信部重点实验室,南京210094
基金项目:国家自然科学基金青年基金(No.51706102);中央高校基本科研业务费专项资金资助项目(No.30917011325)。
摘    要:本文采用微加热器对液滴进行局部加热,并对其蒸发沸腾现象进行了可视化研究.液滴局部加热后产生局部沸腾现象,内部生成单气泡,气泡附着在加热基板上,持续生长,当达到某个临界点气泡破裂.在加热初期,气泡生长速度很快,随着加热过程的不断进行,气泡的生长速度逐渐放缓;随着气泡生长顺序的不断推迟,最大直径减小;加热功率的提升会增加气...

关 键 词:液滴  单气泡  局部加热  沸腾  微型加热器

Study on Bubble Dynamics Inside Droplets Under Local Boiling
HU Ding-Hua,QIU Han,LI Qiang. Study on Bubble Dynamics Inside Droplets Under Local Boiling[J]. Journal of Engineering Thermophysics, 2021, 42(4): 1026-1031
Authors:HU Ding-Hua  QIU Han  LI Qiang
Affiliation:(MIT Key Laboratory of Thermal Control of Electronic Equipment,Nanjing University of Science and Technology,Nanjing 210094,China)
Abstract:In this paper,the droplet is heated locally by a microheater,and its evaporation and boiling process is observed and recorded.While the droplet is heated locally,a single bubble is formed inside.The bubble adheres to the heating substrate and continues to grow until it reaches a certain critical point and bursts.In the early stage of heating,the bubble growth rate is very fast.With the continuous heating process,the bubble growth rate gradually slows down.The maximum diameter decreases with the delay of bubble growth sequence.The increase of heating power will increase the bubble growth rate and shorten the bubble growth time.Through the study on the process of bubble breaking,the process of bubble breaking begins with the rupture of the liquid film above the bubble,forming an unstable Rayleigh flow and the upwelling droplets.Under the action of the surface tension,the initial state is restored.The diameter of bubble breaking will affect droplet fluctuation amplitude and period.
Keywords:droplet  bubble  local heat  boiling  microheater
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号