首页 | 本学科首页   官方微博 | 高级检索  
     

板条侧面绝热技术研究
引用本文:蔡震,杨成龙,杨森林,姚震宇. 板条侧面绝热技术研究[J]. 强激光与粒子束, 2002, 14(4): 493-496
作者姓名:蔡震  杨成龙  杨森林  姚震宇
作者单位:中国工程物理研究院 应用电子学研究所,四川 绵阳 621900
基金项目:国家 8 6 3激光技术领域资助项目 ( 86 3-4 0 1-1)
摘    要: 分析了当侧面绝热不彻底时所带来的侧向温度梯度对板条光程畸变造成的影响,提出采用吸收材料吸收板条的自发辐射,控制吸收材料的温升使之与板条中心的平均温度相同的方法来实现板条侧面绝热,并给出了“隔热层+吸收层+铜热沉”的绝热结构的设计方法。板条热透镜效应实验结果表明,在500Hz重复频率下,未装绝热结构的板条热焦距为0.78m,而装有绝热结构的板条的热焦距为1.93m,热聚焦大为改善。

关 键 词:板条激光器  光学畸变  热聚焦  绝热
文章编号:1001-4322(2002)04-0493-04
收稿时间:2001-11-17
修稿时间:2001-11-17

Study on the adiabatic technology of slab laser
CAI Zhen,YANG Cheng-long,YANG Sen-lin,YAO Zhen-yu. Study on the adiabatic technology of slab laser[J]. High Power Laser and Particle Beams, 2002, 14(4): 493-496
Authors:CAI Zhen  YANG Cheng-long  YANG Sen-lin  YAO Zhen-yu
Affiliation:Institute of Applied Electronics , CAEP, P. O. Box 919-1013 Mianyang 621900 ,China
Abstract:On the base of analyzing the thermal lensing effect caused by the temperature-gradient in direction of unpolished-face, a new type construction consisted of absorbing glass, insulative glass and heat sink has been designed for adiabatic structure of slab, and the experiment of thermal focal length of slab has been done. The result proves that the thermal lensing effect of slab has been improved due to adoptation of adiabatic construction. The focal length of 1.93m in direction of unpolished-face has been measured from the slab with adiabatic construction at 500Hz, comparing with 0.78m measured from the slab without adiabatic construction.
Keywords:slab laser  optical distortion  thermal focus  adiabatic  
本文献已被 CNKI 维普 万方数据 等数据库收录!
点击此处可从《强激光与粒子束》浏览原始摘要信息
点击此处可从《强激光与粒子束》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号