首页 | 本学科首页   官方微博 | 高级检索  
     检索      

一种短波信道中数字信号调制方式识别算法
引用本文:李鹏,汪芙平,王赞基.一种短波信道中数字信号调制方式识别算法[J].电波科学学报,2007,22(5):735-739.
作者姓名:李鹏  汪芙平  王赞基
作者单位:清华大学,电机工程与应用电子技术系,北京,100084
摘    要:短波天波信道存在多径效应及冲击和高斯噪声.针对短波信道特点,提出先利用零记忆非线性系统抑制冲击噪声,后分段盲均衡,基于最大后验概率识别的分类方法.零记忆非线性系统可抑制冲击噪声,而让信号无失真通过.分段均衡减弱信道时变和参数估计误差对均衡器影响.由于冲击噪声的瞬时性和信道时变性,使每段信号均衡效果并不一样,采用最大后验概率的方法选用均衡效果最好的一段信号识别.仿真表明,在典型短波信道且含有冲击噪声情况下,信噪比10 dB时,平均识别概率大于90%,该算法适合在实际中应用.

关 键 词:调制识别  短波信道  零记忆非线性  盲均衡
文章编号:1005-0388(2007)05-0735-05
收稿时间:2006-05-03
修稿时间:2006年5月3日

Algorithm for modulation recognition in shortwave channel environment
LI Peng,WANG Fu-ping,WANG Zan-ji.Algorithm for modulation recognition in shortwave channel environment[J].Chinese Journal of Radio Science,2007,22(5):735-739.
Authors:LI Peng  WANG Fu-ping  WANG Zan-ji
Institution:Department of Electrical Engineering, Tsinghua University, Beij ing 100084, China
Abstract:The shortwave channel is a kind of time-variant multipath channel with impulsive noise and Gauss noise. The method of zero-memory non-linearity system and segmental blind equalization is proposed for modulation recognition. An ideal zero-memory non-linearity system transforms the impulsive noise to Gauss noise, leaving the signal intact. Segmental equalization relieves the influence on equalizer caused by time-variant channel and error of parameters estimation. The results of equalization have much difference because of remain impulsive noise and time-variant channel. The optimal equalized segmentation determining the modulation type is selected by the maximum posterior probability. Simulation results show average successful rates are more than 90% in shortwave channels with impulsive noise when SNR is above 10dB.
Keywords:modulation recognition  shortwave channel  zero-memory non-linearity  blind equalization
本文献已被 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号