| 600~760 ℃范围内超高压力的测定——铅熔点法 |
| |
| 引用本文： | 洪时明,罗湘捷.600~760 ℃范围内超高压力的测定——铅熔点法[J].高压物理学报,1989,3(2):159-164. |
| |
| 作者姓名： | 洪时明 罗湘捷 |
| |
| 作者单位： | 成都科技大学高温高压物理研究所与应用物理研究所
(洪时明，罗湘捷，王永国，孙珠妹)，成都科技大学高温高压物理研究所与应用物理研究所(姜仁柱) |
| |
| 摘 要： | 在DS 6×800A压机上，用NiC-NiSi热电偶测量出高压腔内铅的熔点，再根据铅的液-固相变曲线得出所对应的压力。在600~760 ℃温度范围内，测定出高压腔内压力（1.27~6.62 GPa）与油压的对应关系。对两种不同传压介质腔内压力测定的结果表明，采用NaCl作内层传压介质后，其传压效果比不用NaCl只用叶腊石的情况提高了10%。
|
| 关 键 词： | 超高压力 熔点 铅 |
| 收稿时间： | 1989-02-25; |
Measurement of High Pressure at the Temperature of 600 to 760 ℃ by Melting Point of Plumbum |
| |
| Hong Shiming,Luo Xiangjie,Wang Yongguo,Sun Zhumei,Jiang Renzhu.Measurement of High Pressure at the Temperature of 600 to 760 ℃ by Melting Point of Plumbum[J].Chinese Journal of High Pressure Physics,1989,3(2):159-164. |
| |
| Authors: | Hong Shiming Luo Xiangjie Wang Yongguo Sun Zhumei Jiang Renzhu |
| |
| Institution: | 1. Institute of Applied Physics, Chengdu University of Science and Technology, Chengdu 610065, China;2. Institute of High-Temperature and High-Pressure Physics, Chengdu University of Science and Technology, Chengdu 610065, China |
| |
| Abstract: | Melting points of Pb under high pressure were measured with the NiCr-NiSi thermocouple, using the cubic anvil type high pressure apparatus, so that the relation between pressure in cell and oil pressure was obtained according to the melting curve of Pb in the range from 600 to 760 ℃ for two assemblies of pressure mediums. The contrast result was clear, that the pressure in the cell was higher about 10%, when NaCl was used as the internal pressure medium than the pyrophylite was used under the same oil pressure. |
| |
| Keywords: | high pressure melting point plumbum |
| 本文献已被 CNKI 维普 等数据库收录！ |
| 点击此处可从《高压物理学报》浏览原始摘要信息 |
| 点击此处可从《高压物理学报》下载免费的PDF全文 |
