Development of generalized Iwan model to simulate frictional contacts with variable normal loads

Most friction models are originally proposed to predict restoring forces in mechanical contacts with constant normal load. In practice the contact interface kinematics may involve normal motion in addition to the tangential displacements, leading to variation of the contact normal load. This phenomenon is observed most strongly in contacts with high lateral vibration amplitudes and is known as slap. The current study establishes a general friction model to account for variation in the normal load and enables one to predict the behavior of a contact more precisely. Iwan model (1966) 5] is a suitable candidate for contact interface modeling and is able to represent the stick-micro/macro slip behavior involved in a friction contact. This physical based model is employed in the current work and its physical parameters are generalized to include the normal load variation effects. The model is characterized by a slippage distribution density function and a linear stiffness at stick state. Both these parameters, defined in presence of constant normal load in the original model, are derived considering normal load variation leading to generalization of the contact model. Conventional models with constant normal loads produce symmetric contact interface hysteresis loops, but the developed generalized Iwan model is capable of generating asymmetric hysteresis loops similar to those frequently seen in experiments. The generalized contact model is employed to simulate the measured behavior of a beam with frictional support observed in an experimental test set-up. The contact slippage distribution function is first identified in a constant normal load condition. Next in low levels of contact preloads where variation of the normal load is significant, the identified distribution function in generalized form is employed to predict the experimental observations.