Self-assembly control of a pyridine-containing diblock copolymer by perfluorinated counter anions during salt-induced micellization

The micelle formation of poly(4-pyridinemethoxymethyl)styrene]-block-polystyrene (PPySt-b-PSt) was studied in the nonselective solvent using perfluoroalkyl carboxylic acids. PPySt-b-PSt showed no self-assembly into micelles in THF, because this solvent was nonselective for the copolymer. Dynamic light scattering demonstrated that the diblock copolymer formed the micelles in the solvent in the presence of perfluoroalkyl carboxylic acids in which the number of carbons in the perfluoroalkyl chains was over eight. ¹H NMR revealed that the micellization proceeded through the salt formation of the pyridinium perfluoroalkyl carboxylate and through the aggregation of the perfluoroalkyl chains in the counter anions. The hydrodynamic radius and the aggregation number of the micelles increased with an increase in the length of the perfluoroalkyl chain. The copolymer needed less carboxylic acid with longer perfluoroalkyl chain to form the micelles. The copolymer produced the micelles with lower aggregation number and higher critical micelle concentration at higher temperature, although the micellar size was almost independent of the temperature. The micelles were unstable with respect to the variation in the temperature, and were dissociated into the unimers with the increase in the temperature. The micelles, however, were reconstructed by decreasing the temperature. This dissociation–reconstruction of the micelles was controlled reversibly not only by the temperature but also by the concentration of the perfluoroalkyl carboxylic acid. An increase in the acid concentration suppressed the dissociation into the unimers, while promoting the reconstruction of the micelles.