Enhanced EPR sensitivity from a ferroelectric cavity insert.

We report the development of a simple ferroelectric cavity insert that increases the electron paramagnetic resonance (EPR) sensitivity by an order of magnitude when a sample is placed within it. The insert is a hollow cylinder (length 4.8 mm, outside diameter 1.7 mm, inside diameter 0.6 mm) made from a single crystal of KTaO(3), which has a dielectric constant of 230 at X-band (9.5 GHz). Its outside dimensions were chosen to produce a resonant frequency in the X-band range, based on electromagnetic field modeling calculations. The insert increases the microwave magnetic field (H(1)) at the center of the insert by a factor of 7.4 when placed in an X-band TM(110) cavity. This increases the EPR signal for a small (volume 0.13 microL) unsaturated nitroxide spin label sample by a factor of 64 at constant microwave power, and by a factor of 9.8 at constant H(1). The insert does not significantly affect the cavity quality factor Q, indicating that this device simply redistributes the microwave fields within the cavity, focusing H(1) onto the sample inside the insert, thus increasing the filling factor. A similar signal enhancement is obtained in the TM(110) and TE(102) cavities, and when the insert is oriented either vertically (parallel to the microwave field) or horizontally (parallel to the DC magnetic field) in the TM(110) cavity. This order-of-magnitude sensitivity enhancement allows EPR spectroscopy to be performed in conventional high-Q cavities on small EPR samples previously only measurable in loop-gap or dielectric resonators. This is of particular importance for small samples of spin-labeled biomolecules.