首页 | 本学科首页   官方微博 | 高级检索  
     

X波段高峰值功率速调管功率合成器设计
引用本文:孙鹏,丁耀根,赵鼎. X波段高峰值功率速调管功率合成器设计[J]. 强激光与粒子束, 2007, 19(11): 1865-1868
作者姓名:孙鹏  丁耀根  赵鼎
作者单位:中国科学院,电子学研究所,北京,100080;中国科学院,研究生院,北京,100039;中国科学院,电子学研究所,北京,100080
基金项目:国家高技术研究发展计划(863计划)
摘    要: 基于微波电路理论和EBMA(extended boundary condition model analysis)电磁计算方法,先后设计了一个工作在9 GHz的4合1和8合1功率合成器。功率合成器可将多个侧壁矩形波导中相同输入的TE10模电磁波在中心圆波导中以TE01模式输出,实现功率的合成。利用EBMA方法和CST软件对所设计功率合成器的传输系数进行了计算,在中心频率9 GHz处,计算结果分别为1.00和0.99,从而验证了功率合成器具有良好的功率合成效果。对于8合1功率合成器,还根据模型简化的想法,使得功率合成器加载后,对输出腔间隙阻抗的计算成为可能。

关 键 词:高功率微波源  X波段速调管  功率合成  电磁匹配  微波等效电路
文章编号:1001-4322(2007)11-1865-04
收稿时间:2006-12-12
修稿时间:2007-07-18

Design of power combiner for X-band high power klystron
SUN Peng,DING Yao-gen,ZHAO Ding. Design of power combiner for X-band high power klystron[J]. High Power Laser and Particle Beams, 2007, 19(11): 1865-1868
Authors:SUN Peng  DING Yao-gen  ZHAO Ding
Affiliation:1. Institute of Electronics, Chinese Academy of Sciences, P.O.Box 2652, Beijing 100080, China;2. Graduate University of Chinese Academy of Sciences, Beijing 100039, China
Abstract:With the urgent need of high power sources, a design method for power combiner of X-band high power klystron based on microwave theory and EBMA(extended boundary condition modal analysis) is presented in this paper.Power combiner can combine the input from its rectangular arms into one central circular waveguide working in TE01 mode,so the transmission parameter can determine its performance.Using EBMA and CST software,the transmission parameter of the designed 4-to-1 power combiner is calculated as 1 and 0.99,respectively,which can confirm its validity.For 8-to-1 power combiner,a simplified model has been proposed,which makes possible the calculation of gap impedance of an output cavity after its loading.
Keywords:High power source  X-band klystron  Power combiner  Mode matching  Equivalent microwave circuit
本文献已被 CNKI 维普 万方数据 等数据库收录!
点击此处可从《强激光与粒子束》浏览原始摘要信息
点击此处可从《强激光与粒子束》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号