首页 | 本学科首页   官方微博 | 高级检索  
     检索      

电激励红外多波段化学激光器中稀释剂注入方式对激光输出的影响
引用本文:王红岩,袁圣付,张鹏,姜宗福.电激励红外多波段化学激光器中稀释剂注入方式对激光输出的影响[J].强激光与粒子束,2005,17(3):339-342.
作者姓名:王红岩  袁圣付  张鹏  姜宗福
作者单位:国防科学技术大学,光电科学与工程学院,湖南,长沙,410073;国防科学技术大学,光电科学与工程学院,湖南,长沙,410073;国防科学技术大学,光电科学与工程学院,湖南,长沙,410073;国防科学技术大学,光电科学与工程学院,湖南,长沙,410073
基金项目:国家自然科学基金资助课题(10304025)
摘    要: 以DF为例,在一台单放电管电激励红外多波段激光器上测试了两种稀释剂注入方式下激光器的输出特性。激光器输出功率、模式分布、光谱分布的测量结果表明,在常规注氦方式下,在放电管末端引入一路氦气可以增加功率输出,拉长顺流增益区长度,加强高振动能级间的跃迁。经分析原因可能在于F原子壁面复合损失的减少、增益区流速的增加以及去激活效应的减弱。

关 键 词:红外  多波段  化学激光  稀释剂注入方式
文章编号:1001-4322(2005)03-0339-04
收稿时间:2004/9/6
修稿时间:2004年9月6日

Effect of two different diluent injecting methods on a discharge excited in frared multi-band chemical laser
WANG Hong-yan,YUAN Sheng-fu,ZHANG Peng,JIANG Zong-fu.Effect of two different diluent injecting methods on a discharge excited in frared multi-band chemical laser[J].High Power Laser and Particle Beams,2005,17(3):339-342.
Authors:WANG Hong-yan  YUAN Sheng-fu  ZHANG Peng  JIANG Zong-fu
Institution:College of Opto-Electric Science and Engineering, National University of Defense Technology, Changsha 410073, China
Abstract:Output characteristics were tested under two diluent injecting methods on a single tube discharge excited infrared multi-band chemical laser by taking DF as a typical case. Experiment results of laser power output, mode characteristics, and spectra distributions indicated that injecting He from the end of discharge tube in addition to regular He injecting can increase the power of output, lengthen flow direction's gain length and strengthen the transitions between higher vibration levels, the reason was attributed to reduction of combination less of F atoms on wall, increase of active zone's flow rate and mitigation of deactivation effect.
Keywords:Infrared  Multi-band  Chemical laser  Diluent injecting method
本文献已被 CNKI 维普 万方数据 等数据库收录!
点击此处可从《强激光与粒子束》浏览原始摘要信息
点击此处可从《强激光与粒子束》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号