Mixing and detonation structure in a rotating detonation engine with an axial air inlet |
| |
Authors: | Takuma Sato Fabian Chacon Logan White Venkat Raman Mirko Gamba |
| |
Affiliation: | Department of Aerospace Engineering, University of Michigan, Ann Arbor, MI 48109, USA |
| |
Abstract: | High-fidelity simulations of an experimental rotating detonation engine with an axial air inlet were conducted. The system operated with hydrogen as fuel at globally stoichiometric conditions. Instantaneous data showed that the detonation front is highly corrugated, and is considerably weaker than an ideal Chapman–Jouguet wave. Regions of deflagration are present ahead of the wave, caused by mixing with product gases from the previous cycle, as well as the injector recovery process. It is found that as the post-detonation high pressure flow expands, the injectors recover unsteadily, leading to a transient mixing process ahead of the next cycle. The resulting flow structure not only promotes mixing between product and reactant gases, but also increases likelihood of autoignition. These results show that the detonation process is very sensitive to injector design and the transient behavior during the detonation cycle. Phase-averaged statistics and conditionally averaged data are used to understand the overall reaction structure. Comparisons with available experimental data on this configuration show remarkable good agreement of the predicted reacting flow structure. |
| |
Keywords: | |
本文献已被 ScienceDirect 等数据库收录! |
|