Determination of Aluminum by Adsorptive Cathodic Stripping Voltammetry with 1,2‐Dihydroxyanthraquinone‐3‐Sulfonic Acid (DASA): Effect of Thin Mercury Film Electrode

An analytical technique for aluminum (Al) based upon the complexation reaction between Al and the ligand – DASA (1,2‐dihydroxy‐anthraquinone‐3‐sulfonic acid) has previously been implemented successfully at the hanging mercury drop electrode (HMDE). There are several advantages of using mercury film electrodes (TMFE) over the HMDE, particularly if disposal of mercury is of concern. The novelty of using TMFE for adsorptive cathodic stripping voltammetry (ACSV) of Al – DASA is demonstrated in this paper. The peak potential used for the detection of Al in this system was at ?1.15 V (vs. Ag/AgCl). The method produced a limit of detection (LOD) of 1 μM (n=5) and a linear working range of 1–20 μM Al. Atomic force microscopy methods were used to investigate the nature of the TMFE and its interaction with DASA. The mercury droplets on the TMFE have a limited volume and this may lead to overloading of the electrode at relatively low concentrations of DASA. Interferences from Fe, Ca, Zn and Mg were investigated with only Fe appearing to interfere with the Al‐DASA system. Two masking agents (o‐phenanthroline and 2,2′‐bipyridyl) were shown to be effective at preventing the Fe interference.