Electrochemical Biosensor Based on Bienzyme and Carbon Nanotubes Incorporated into an Os‐complex Thin Film for Continuous Glucose Detection in Human Saliva

Saliva opens a door for noninvasive and painless glucose testing since it reflects changes in the body physiology of diabetic individuals as compared to healthy ones. In this paper, a unique, disposable saliva biosensor has been developed for accurate, low cost, and continuous glucose monitoring. The biosensor exhibits linear dependence of the catalytic current upon glucose bulk concentration over the 0.05–1.5 mM range (R=0.998). A detection limit of 0.003 mM can be calculated considering three times the standard deviation of the blank signal divided by the sensitivity of the sensor. The selectivity of the biosensor was evaluated by adding the interferent species of lactate, ascorbic acid and uric acid into in 0.5 mM glucose; the nearly negligible interference current indicates its good selectivity. The operational stability of the biosensor was measured in 1 mM glucose over a 2 h period (RSD=3.27 %). A clinical trial on real‐time noninvasive salivary glucose monitoring was carried out on 30 individuals by measuring subjects’ salivary glucose and blood glucose in parallel. The results show that there is a good correlation of glucose levels in saliva and in blood 2 h after breakfast. Thus, the disposable biosensor would be a potential alternative for continuous glucose detection in human saliva.