| 固体材料低温热导率的测量 |
| |
| 引用本文： | 陈艳婕,张鹏,王如竹. 固体材料低温热导率的测量[J]. 低温与超导, 2010, 38(6) |
| |
| 作者姓名： | 陈艳婕 张鹏 王如竹 |
| |
| 作者单位： | 上海交通大学制冷与低温工程研究所,上海,200240;上海交通大学制冷与低温工程研究所,上海,200240;上海交通大学制冷与低温工程研究所,上海,200240 |
| |
| 摘 要： | 本实验以4.2K二级G-M制冷机为冷源,采用稳态轴向热流法测量了304不锈钢与环氧玻璃钢在低温下的热导率,讨论了样品上初始温差的成因及其影响,给出了热导率真实值所在的区间,并对测量误差以及各种漏热带来的影响进行了分析。
|
| 关 键 词： | 低温 热导率 固体材料 初始温差 |
Thermal conductivity measurements of solid materials at low temperatures |
| |
| Chen Yanjie,Zhang Peng,Wang Ruzhu. Thermal conductivity measurements of solid materials at low temperatures[J]. Cryogenics and Superconductivity, 2010, 38(6) |
| |
| Authors: | Chen Yanjie Zhang Peng Wang Ruzhu |
| |
| Affiliation: | Chen Yanjie,Zhang Peng,Wang Ruzhu(Institute of Refrigeration and Cryogenics,Shanghai Jiao Tong University,Shanghai 200240,China) |
| |
| Abstract: | In this paper,a 4.2K two-stage G-M refrigerator was used as the cold source to have the test of the thermal conductivities of 304 stainless steel and glass fiber reinforced epoxy at low temperatures by using the longitudinal steady heat flow method.The origins of the initial temperature difference of the samples and the corresponding influences were discussed,and the range where the true values of thermal conductivity was obtained.The measurement error and the effect of heat leakage were also analyzed. |
| |
| Keywords: | Low temperature Thermal conductivity Solid material Initial temperature difference |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
