| Z箍缩丝阵负载微型装配系统 |
| |
| 引用本文： | 蔡红梅, 吴卫东, 张林, 等. Z箍缩丝阵负载微型装配系统[J]. 强激光与粒子束, 2009, 21(09). |
| |
| 作者姓名： | 蔡红梅 吴卫东 张林 李腾 周秀文 余斌 杨波 刘旭东 刘延杰 |
| |
| 作者单位： | 1.中国工程物理研究院 激光聚变研究中心, 四川 绵阳 621 900;;;2.哈尔滨工业大学 机器人研究所, 哈尔滨 1 50001 |
| |
| 摘 要： | 在利用金属丝阵Z箍缩产生强X射线辐射的方法中，为获得超强X射线，一般采用直径几μm的钨丝构成单、双或多层圆柱面状丝阵负载，其中丝阵负载的结构和装配精度是关键因素。为制备出均匀、平直的丝阵负载，进行了Z箍缩丝阵负载微型装配系统的研制，建立了基于机器视觉、微力传感器和精密运动控制系统的Z箍缩丝阵负载微型装配实验系统。该系统成功实现了双层直径5 μm钨丝丝阵的装配，且张力控制精度达0.002 N。
|
| 关 键 词： | Z箍缩 丝阵负载 微型装配 微力传感器 |
Z-pinch wire-array micro assembly station |
| |
| cai hongmei, wu weidong, zhang lin, et al. Z-pinch wire-array micro assembly station[J]. High Power Laser and Particle Beams, 2009, 21. |
| |
| Authors: | cai hongmei wu weidong zhang lin li teng zhou xiuwen yu bin yang bo liu xudong liu yanjie |
| |
| Affiliation: | 1. Research Center of Laser Fusion,CAEP,P.O.Box 919-987,Mianyang 621900,China;;;2. State Key Laboratory of Robotics and System,Harbin Institute of Technology,Harbin 150001,China |
| |
| Abstract: | The use of a large number of wires in annular Z-pinch implosions has enabled the generation of strong X rays, which is significantly affected by the structure of the wire-array and the assembly precision of the wires.In order to obtain more symmetrical and straight wire-arrays, we studied the Z-pinch wire-array micro assembly station, and developed an experimental facility which was based on machine vision,micro force sensor and precision motion system.The station successfully accomplished the assembly of a nested wire-array with 5 μm tungsten filaments and the tension precision reached 0.002 N. |
| |
| Keywords: | z-pinch wire-array micro assembly micro force sensor |
|
| 点击此处可从《强激光与粒子束》浏览原始摘要信息 |
|
点击此处可从《强激光与粒子束》下载全文 |
|
