|
|||||
|
|
| 传动系统同轴度测量方法的改进 | |
| 引用本文： | 仓玉萍,吴国俊,王渭晋,焦国华,陈良益. 传动系统同轴度测量方法的改进[J]. 光子学报, 2009, 38(11) |
| 作者姓名： | 仓玉萍 吴国俊 王渭晋 焦国华 陈良益 |
| 作者单位： | 1. 中国科学院西安光学精密机械研究所,西安,710119;中国科学院研究牛院,北京,100049 2. 中国科学院西安光学精密机械研究所,西安,710119 3. 西安卫星测控中心,西安,714000 |
| 基金项目： | 中科院"西部之光"人才培养计划西部博士项目资助 |
| 摘 要： | 针对现有轴-轴同轴度测量方法的缺陷,通过建立一套数学模型,得出了测量设备安装偏差量、设备测量值和传动轴旋转角度之间的关系方程,从而实现了只需在小角度范围内旋转,即可得出不含安装误差的轴-轴同轴度偏差量.另外,针对测量设备的特点提出了测量孔-孔同轴度的方法,从而实现了一套设备可以同时测量轴-轴、孔-孔同轴度. |
| 关 键 词： | 光学工程 同轴度测量 激光探测 传动系统 安装误差 |
Improvement Coaxiality Measurement Method for Transmission Shaft |
|
| CANG Yu-ping,WU Guo-jun,XIE Ai-min,JIAO Guo-hua,CHEN Liang-yi. Improvement Coaxiality Measurement Method for Transmission Shaft[J]. Acta Photonica Sinica, 2009, 38(11) | |
| Authors: | CANG Yu-ping WU Guo-jun XIE Ai-min JIAO Guo-hua CHEN Liang-yi |
| Abstract: | The coaxiality measurement method of transmission shaft is improved. The equation about installing deviation, measured value and gyrate angle is obtained by establishing a set of mathematical model against the shortcoming of existing coaxiality measurement. And the axis-to-axis coaxiality deviation without installing error is obtained by rotating transmission shaft in a little angle range. The measurement of hole-to-hole coaxiality is also introduced based on the characteristic of equipment. The measurement of axis-to-axis and hole-to-hole coaxiality can be obtained simultaneously by one set of equipment. |
| Keywords: | Optical engineering Coaxiality measurement Laser detection Transmission agent Installation error |
| 本文献已被 万方数据 等数据库收录！ | |