Response Factor Correction for Estimation of Ester Content in Biodiesel

EN 14103 is generally used for quantification of ester content in biodiesel free of heptadecanoate ester (C17:0) or methyl nonadecanoate (C19:0), which are employed as internal standards. It was observed that ester content obtained by EN 14103 method did not match with theoretical value of biodiesel, as the method did not take care of response factors of each component to compensate for changes in detector sensitivities. In this study, the whole range of fatty acid (C₆–C_24:1) methyl esters have been taken into consideration for the calculation of the ester content. Methyl nonadecanoate (C19:0) was used as an internal standard. The response factors of both the saturated and unsaturated methyl esters in the range C₆–C_24:1 were estimated and found in the range 0.97–1.16. The ester content was calculated after applying the response factors of each methyl ester. The results obtained by this method agreed well with the theoretical value as compared to estimated value using EN14103 method. The results obtained from this method also show good correlation (R ² = 0.98) with ¹H-NMR method. Further, this method does not depend on nature of biodiesel feed stock and is applicable to all methyl biodiesel samples obtained from different raw materials.