| 制备工艺对多孔阳极氧化铝特性的影响 |
| |
| 引用本文： | 张霞,胡明,孟宪权. 制备工艺对多孔阳极氧化铝特性的影响[J]. 武汉大学学报(理学版), 2009, 55(5) |
| |
| 作者姓名： | 张霞 胡明 孟宪权 |
| |
| 作者单位： | 武汉大学,物理科学与技术学院,湖北,武汉,430072 |
| |
| 摘 要： | 通过对草酸溶液中制备的多孔阳极氧化铝(PAA)的形貌、晶态结构和光致发光(PL)特性的表征和机理分析,研究了草酸电解液浓度、阳极氧化电压和退火等丁艺对PAA的形成及特性的影响.PAA的孔径在50～120 nm之间,且随着阳极氧化电压的升高而增大,而受电解液浓度的影响较小.X射线衍射结果表明:PAA为非晶态结构,退火之后结晶,并有多相共存.PL测试表明PAA在375～500 nm之间有一较宽的蓝色发光带,发光峰在425 nm左右,是由氧空位引起的,且其峰强可通过改变阳极氧化电压和草酸浓度等参数来调制.
|
| 关 键 词： | 多孔阳极氧化铝 两步阳极氧化 光致发光 |
Effects of Fabrication Methods on Property of Porous Anodic Alumina |
| |
| ZHANG Xia,HU Ming,MENG Xianquan. Effects of Fabrication Methods on Property of Porous Anodic Alumina[J]. JOurnal of Wuhan University:Natural Science Edition, 2009, 55(5) |
| |
| Authors: | ZHANG Xia HU Ming MENG Xianquan |
| |
| Abstract: | The effect of electrolyzing solution concentration,oxidation voltage and annealing treatment were studied by analyzing porous anodic alumina(PAA)'s morphology,structure and photoluminescence properties in oxalic acid.The results show that the pore diameter increases with the increase of oxidation voltage,but changes less remarkably with solution concentration than with the former.X-ray diffraction analysis shows that PAA will turn to crystal with some phases coexisted after annealing treatment; and there is a strong photoluminescence(PL) band in the range of 375-500 nm with a peak position at around 425 nm owing to oxygen vacancy,which can be modulated by change parameters such as solution concentration,voltage,and so on. |
| |
| Keywords: | porous anodic alumina two-step anodic oxidation photoluminescence |
| 本文献已被 万方数据 等数据库收录！ |
|
