Oxindole synthesis via polar–radical crossover of ketene-derived amide enolates in a formal [3 + 2] cycloaddition |
| |
| Authors: | Niklas Radhoff Armido Studer |
| |
| Affiliation: | Organisch-Chemisches Institut, Westfälische Wilhelms-Universität, Corrensstraße 40, 48149 Münster Germany, |
| |
| Abstract: | Herein we introduce a simple, efficient and transition-metal free method for the preparation of valuable and sterically hindered 3,3-disubstituted oxindoles via polar–radical crossover of ketene derived amide enolates. Various easily accessible N-alkyl and N-arylanilines are added to disubstituted ketenes and the resulting amide enolates undergo upon single electron transfer oxidation a homolytic aromatic substitution (HAS) to provide 3,3-disubstituted oxindoles in good to excellent yields. A variety of substituted anilines and a 3-amino pyridine engage in this oxidative formal [3 + 2] cycloaddition and cyclic ketenes provide spirooxindoles. Both substrates and reagents are readily available and tolerance to functional groups is broad.Herein we introduce a simple, efficient and transition-metal free method for the preparation of valuable and sterically hindered 3,3-disubstituted oxindoles via polar–radical crossover of ketene derived amide enolates.Oxindoles, in particular the 3,3-disubstituted congeners, are highly valuable substructures in medicinal chemistry. The oxindole core can be found in various biologically active compounds, that are for example used in the treatment of cancer or as antibacterial agents.1 In addition, the oxindole moiety also occurs in several complex natural products.2 The first oxindole synthesis was reported by Baeyer and Knop in 1866.3 That time, isatin was converted by sodium amalgam reduction to the corresponding oxindole. Since then, many methods for the preparation of 3,3-disubstituted oxindoles have been developed that proceed via functionalization of a pre-existing oxindole core.4 In addition, methods for the construction of 3,3-disubstituted oxindoles starting from acyclic precursors have also been introduced.5,6 Along these lines, transition metal-mediated reactions5,7 or homolytic aromatic substitutions (HAS)8–14 have found to be highly efficient for the construction of the oxindole core. Focusing on the latter approach, the intramolecular HAS proceeds via α-carbonyl radicals derived from radical addition to N-arylacrylamides,8 reduction of α-haloarylamides9 or oxidation of the corresponding enolates10–14 ().Open in a separate windowSelected strategies for the synthesis of oxindoles.In 2017, the group of Taylor developed a transition metal-free enolate oxidation-HAS-approach towards oxindoles at low temperature using elemental iodine as the oxidant and malonic acid derived N-aryl amides as substrates which are readily deprotonated.14The unique reactivity of ketenes15 has been explored extensively,16 especially in [2 + 2]-cycloadditions.17 Moreover, Staudinger,18 Lippman19 and Taylor20 showed that ketenes react with aryl nitrones in a tandem [3 + 2]-cycloaddition-[3,3]-sigmatropic-rearrangement cascade21 followed by hydrolysis to provide oxindoles (). The use of chiral nitrones leads to chirality transfer and enantiomerically enriched oxindoles can be obtained via this approach.21,22 In contrast to the examples discussed in , two σ-bonds are formed and the overall sequence can be regarded as a formal [3 + 2] cycloaddition. Despite good yields and high enantiomeric excess, nitrones have to be used as precursors and an aldehyde is formed as the byproduct diminishing reaction economy of these elegant cascades.To address these drawbacks, we decided to use the nucleophilic addition23–26 of deprotonated anilines to ketenes for the generation of the corresponding amide enolates that should then be oxidized in a single electron transfer process to α-amide radicals which can undergo a homolytic aromatic substitution providing direct access to sterically challenging 3,3-disubstituted oxindoles in a straightforward one-pot sequence (). This polar–radical crossover reaction shows high atom economy and as the reaction with the nitrones can also be regarded as a formal [3 + 2] cycloaddition.We initiated the optimization study with N-methylaniline 1a and ethyl phenyl ketene 2a, which was prepared in an easy and scalable one-pot protocol starting from the corresponding carboxylic acid, as model substrates. Deprotonation of 1a with n-BuLi in THF and subsequent addition to the ketene 2a led to desired Li-enolate which was confirmed by protonation with water and isolation of the amide 4aa (56%). Pleasingly, addition of ferrocenium hexafluorophosphate (FcPF6, 2.2 equiv.) at room temperature to the Li-enolate afforded the desired oxindole 3aa in 29% yield ( Light does not appear to play a crucial role in this transformation, as performing the reaction in the dark does not have a significant effect on the reaction outcome ( | Open in a separate windowaReactions (0.20 mmol) were conducted under argon atmosphere.b 1H NMR yield using 1,3,5-trimethoxybenzene as internal standard.cIsolated yield.dStep 1 and 2 were conducted at 0 °C.e N-Iodosuccinimide.fIodine addition at −78 °C, then slowly allowed to warm to room temperature.14gIn the dark.hIrradiation with blue LED (40 W, 467 nm, rt, 8 h).iRefluxing THF for step 3, reaction completed within 2 h.With the optimized reaction conditions in hand, we investigated the scope by first varying the R1-substituent at the N-atom using the ketene 2a as the reaction partner (). In general, increasing the steric bulk at the nitrogen leads to diminished yields of the targeted oxindoles. The lower yields go along with the formation of a larger amount of the corresponding α,β-unsaturated amide side product 5. Thus, as compared to the parent N-methyl derivative, all other N-alkyl derivatives were formed in lower yields (49%, 3ab; 35%, 3ac; 49%, 3ad). The N-benzyl protected oxindole 3af and the N-phenyl oxindole 3ae were isolated in 54% and 56% yield, respectively. Next, a diastereoselective oxindole synthesis was attempted using chiral anilines 1g and 1h. Surprisingly, despite the bulkiness of these nucleophiles containing styryl-type N-substituents, good yields were obtained for the oxindoles 3ag and 3ah (73–79%). Unfortunately, diastereocontrol was low in both cases (1.9 : 1 d.r. and 1.5 : 1 d.r.). Of note, addition of Mg-1g and Mg-1h to ketene 2a was rather slow under the standard reaction condition and a significant amount of unreacted aniline was recovered. That problem could be solved by prolonging the reaction time of both step 1 (deprotonation) and also step 2 (Mg-enolate formation).Open in a separate windowSubstrate scope – variation of substituents at the nitrogen. Reactions (0.20 mmol) were conducted under argon atmosphere. a For step 1 and 2 reaction time was 1 h.Next, the substrate scope was investigated by using different anilines in combination with the ketene 2a (). N-Methyl-p-toluidine 1i and N-methyl-p-haloanilines 1j–m could be successfully transformed to the corresponding oxindoles 3al–am in moderate to good yields (53–87%). Electron-withdrawing and also electron-donating substituents are tolerated and oxindoles derived from p-cyano- (3an, 92%), p-acetyl- (3ao, 30%), p-methoxycarbonyl- (3ap, 82%) and p-methoxy- (3aq, 71%) anilines were isolated in moderate to excellent yields documenting a high functional group tolerance of this reaction. The meta-methyl aniline afforded oxindole 3ar in 76% yield as a 1.8 : 1 mixture of the two regioisomers (only the major isomer drawn). For the pyridyl derivative 3as, a lower yield was obtained (39%), but reaction occurred with complete regiocontrol. Of note, ortho-methyl N-methylaniline provided the corresponding oxindole only in trace amounts (not shown).Open in a separate windowSubstrate Scope – variation of anilines and ketenes. Reactions (0.20 mmol) were conducted under argon atmosphere. a Isolated as an inseparable mixture (1 : 1.4) with the protonated enolate 4fa (56% combined yield).The ketene component was also varied using N-methylaniline 1a as the reaction partner. The transformation of methyl phenyl ketene 2b provided the oxindole 3ba in 58% yield. p-Bromophenyl ethyl ketene 2c and p-iodophenyl ethyl ketene 2d afforded the oxindoles 3ca and 3da in good yields (70% and 76%). For the ibuprofene-derived ketene 2e a lower yield was obtained (3ea, 40%) and the bulkier phenyl isopropyl congener 3fa was isolated in 27% yield as an inseparable mixture with the protonated enolate 4fa (56% combined yield). In the latter case, increasing the reaction time did neither lead to a higher yield of 3fa nor to a suppression of the formation of 4fa. The lower yield is likely caused by steric effects. Surprisingly, diphenyl ketene 2g delivered the targeted oxindole 3ga in acceptable 55% yield despite the steric demand of the two phenyl groups and the high stability of the corresponding α-amide radical. Spirocyclic oxindoles are of great interest due to their high pharmaceutical potential.27 We were pleased to find that our method also works for the preparation of such spiro compounds as documented by the successful synthesis of 3ha (26%).Mechanistically, we propose initial formation of the enolate A by nucleophilic attack of the deprotonated aniline to the ketene 2, which is then oxidized by elemental iodine to the α-amide radical B (pathway b). The radical nature of the transformation is supported by the fact that electronic effects on the arene show no influence on the efficiency of the cyclization, as would be shown by a conceivable polar aromatic substitution. Radical B readily cyclizes onto the aniline ring to generate the cyclohexadienyl radical D which is oxidatively rearomatized via cationic intermediate E to finally give the oxindole 3 ().10–14 Alternatively, enolate A can be iodinated with I2 to give the unstable iodide C which then undergoes C–I bond homolysis to generate the radical B (pathway a). Indeed, Taylor and coworkers14 observed under similar reaction conditions the decay of α-iodinated compounds of type Cvia C–I homolysis14,28 to give radicals of type B. Usually, we observed α,β-unsaturated amides analogous to 5aa as by-products. However, the corresponding protonated enolates were detected only in tiny amounts in most of these cases. This strongly suggests that those amides are not formed via disproportionation of radical B. HI-elimination seems more likely, pointing towards the presence of the iodinated species C and thus the contribution of pathway b to product formation. In addition, dimerization of radical B was also not observed.Open in a separate windowSuggested mechanism.To further support pathway b, isolation of the iodinated intermediate C was attempted at low temperature. Upon addition of iodine (1.2 equiv.) to the preformed Mg-enolate A derived from aniline 1a and ketene 2a at −78 °C,14 TLC analysis showed a clean conversion to a single new compound, which was analyzed by rapid ESI-MS analysis and provided evidence for the formation of the iodinated intermediate C (). However, isolation of this highly unstable compound was not possible due to rapid HI-elimination to the amide 5aa. Note that oxindole formation worked well upon I2-addition at −78 °C and subsequent warming to room temperature (see ). This is consistent with the observation from our optimization studies that irradiation with blue light does not contribute to the yield of oxindole 3aa (Open in a separate windowMechanistic experiments. (a) (1) EtMgBr (1.1 equiv.), rt, 30 min, (2) 2a (1.5 equiv.), −78 °C, 30 min, (3) I2 (1.2 equiv.), −78 °C, 15 min in THF (0.01 M). (b) Warm to room temperature in THF (0.01 M), 18 h. (c) NaI (1.2 equiv.) in acetone (0.77 M), rt, 18 h. (d) Irradiation with blue LED (40 W, 467 nm) in THF (0.01 M), rt, 8 h. |
