| Abstract: | Integrated pulsed amperometric detection (IPAD) was applied for the detection of organic compounds for flow injection analysis. The pulse waveform used in the integrated pulsed amperometry consisted of three steps: detection potential, oxidation potential, and adsorption potential. The pulse waveform was applied to the working electrode as the analyte flowed through the electrochemical cell. Unlike ordinary pulsed amperometry, a faradaic current was integrated over the duration period of the detection potential in the IPAD. Therefore, the total charge was measured by integrating the current after the detection potential was applied. The current for the initial 10 ms, after applying the detection potential, was excluded from the integration due to a large charging current at the initial period. Compared with pulsed amperometry, integrated pulsed amperometry provides a better signal-to-noise ratio and a lower detection limit. This method was applied to the quantitative analysis of thiourea as a representative analyte of organosulfur compounds in a flow injection analysis. |
