| 波形钢板-UHPC组合桥面板结构截面优化 |
| |
| 引用本文： | 孙瑜,王焕然,王飞,朋茜. 波形钢板-UHPC组合桥面板结构截面优化[J]. 宁波大学学报(理工版), 2020, 33(3): 105-110 |
| |
| 作者姓名： | 孙瑜 王焕然 王飞 朋茜 |
| |
| 作者单位： | 1.宁波大学 冲击与安全工程教育部重点实验室, 浙江 宁波 315211; 2.宁波工程学院 浙江省土木工程工业化建造工程技术研究中心, 浙江 宁波 315211 |
| |
| 基金项目： | 国家自然科学基金;浙江省自然科学基金;浙江省自然科学基金 |
| |
| 摘 要： | 对实腹式波形顶板-UHPC(超高性能混凝土)组合桥面板进行了改进, 采用空腹式结构建立波形钢板-UHPC组合桥面板有限元模型, 研究UHPC层厚度、波形钢板厚度、波形长度、下缘板宽度和波形高度等截面参数变化对组合桥面板受力特性的影响, 并确定其合理取值范围. 在此基础上, 通过理想点法对参数组合进行优化, 得到合理的参数匹配. 研究结果表明 相较于实腹式组合桥面板, 优化后的组合桥面板自重减小35%, 钢板弯折处应力减小16%; 相较于正交异性钢桥面板, 桥面板用钢量减小7%, 顶板与U肋连接位置应力减小47%.
|
| 关 键 词： | 组合结构 波形钢板 超高性能混凝土 桥面板 参数优化 |
Section optimization of the innovative corrugated steel-UHPC composite bridge deck |
| |
| SUN Yu1,WANG Huanran1,WANG Fei2,PENG Xi2. Section optimization of the innovative corrugated steel-UHPC composite bridge deck[J]. Journal of Ningbo University(Natural Science and Engineering Edition), 2020, 33(3): 105-110 |
| |
| Authors: | SUN Yu1 WANG Huanran1 WANG Fei2 PENG Xi2 |
| |
| Affiliation: | 1.Key Laboratory of Impact and Engineering of Ministry of Education, Ningbo University, Ningbo 315211, China;2.Engineering Research Centre of Industrial Construction in Civil Engineering of Zhejiang Province, Ningbo University of Technology, Ningbo 315211, China |
| |
| Abstract: | Based on the spandrel-filled innovative corrugated steel-UHPC composite bridge deck, the FEM of the improved structure is developed by choosing an open-wed structure in this study. The effects of varied parameters including the UHPC layer thickness, the corrugated steel thickness, the wave length, the lower edge plate width, and the wave depths are studied and the feasible ranges are determined. The parameters’ combination is further optimized by the Ideal Point solution method, with which the reasonable parameter matching is established. Comparing with the spandrel-filled composite bridge deck, the weight is reduced by 35%, and the tensile stress in the bend of steel is reduced by 16%. Comparing with the orthotropic steel bridge deck, the steel quantity is reduced by 7%, and the tensile stress in the rib-to-deck weld joints is reduced by 47%. |
| |
| Keywords: | composite structure corrugated steel plate UHPC bridge deck parameters optimization |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
| 点击此处可从《宁波大学学报(理工版)》浏览原始摘要信息 |
|
点击此处可从《宁波大学学报(理工版)》下载免费的PDF全文 |
|
