The evaluation of the performance of two pyroelectric detectors with vertically aligned multi-walled carbon nanotube coatings

Two LiTaO₃ pyroelectric detectors coated with vertically aligned multi walled carbon nanotube (MWCNT) black coatings were assembled and evaluated using NPL’s detector characterisation facilities. The vertically-aligned nanotube array (VANTA) black coatings were grown on a silicon substrate and subsequently lifted off the silicon and bonded on the pyroelectric crystal substrates. Despite some drawbacks, this method was shown to provide a reliable way of coating delicate substrates such as pyroelectric crystals with VANTA coatings. The performance of the coated and uncoated detectors was evaluated and compared by coating only half of the active area of the test detectors, leaving the other half uncoated. The relative spectral responsivity of the VANTA-coated pyroelectric detectors was shown to be spectrally flat in the 0.8–14 μm wavelength range within the uncertainty of the measurements. The spatial uniformity of response of both detectors exhibited fine structure which was assigned either to the thickness of the VANTA coatings or to their bonding to the pyroelectric crystal. Both coated and uncoated detectors exhibited a super-linear response. This observation was expected in the case of the uncoated detectors, but was surprising in the case of the coated detectors and indicates that the thermal conductivity of vertically aligned multi-walled carbon nanotubes is high along their long axis. The spatial variations of the phase delay experienced by the signal propagating through the VANTA coatings indicate that the thermal diffusivity of the coatings is not spatially uniform.