The triple melting behavior of poly(ethylene terephthalate): Molecular weight effects

The melting behavior of isothermally crystallized PET has been studied using linear heating in a differential scanning calorimeter (DSC). Variables such as crystallization temperature, crystallization time, heating rate, and average molecular weight are the main focus of the study. On the basis of several experimental techniques, a correlation of the melting behavior of PET with the amount of secondary crystallization was found to exist. It was observed that the triple melting of PET is a function of programmable DSC variables such as crystallization temperature, crystallization time, and heating rate. However, in testing the hypothesis that there was a correlation between melting endotherms and secondary crystallization inside spherulites, it was found necessary to use a DSC-independent variable in order to enhance the observed effects. Therefore, on the basis of a crystallization model that involves secondary branching along the edges of parent lamellar structures, it was speculated that an increase in the average molecular weight could affect the triple melting of PET due to an increase of rejected portions of the macromolecules. It was found that the second melting endotherm increased, apparently, at the expense of the third one as the average molecular weight was increased. The second melting endotherm was also found to correlate proportionally with the amount of secondary crystallization inside spherulites. The results support a model of crystallization which basically consists of parent crystals and at least one population of secondary, probably metastable, crystals. This latter structural component must involve excluded portions of the macromolecules that did not crystallize during the isothermal crystallization period of the parent crystals. An increase of molecular weight gives rise to a higher entanglement density which in turn increases the fraction of initially rejected chain sections and therefore the amount of secondary crystallization. © 1997 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 35: 1757–1774, 1997