| 用纳米压痕法分析溶剂对聚醚醚酮(PEEK)力学性能的影响 |
| |
| 引用本文： | TanveerIqbal,Saima Yasin,Ahmad Shakeel,Hamayoun Mahmoo,Fahad Nazir,Paul F. Luckham. 用纳米压痕法分析溶剂对聚醚醚酮(PEEK)力学性能的影响[J]. 化学物理学报, 2018, 31(2): 211-215 |
| |
| 作者姓名： | TanveerIqbal Saima Yasin Ahmad Shakeel Hamayoun Mahmoo Fahad Nazir Paul F. Luckham |
| |
| 作者单位： | 巴基斯坦拉合尔工程技术大学KSK校区, 化学聚合物与复合材料工程系 54890,巴基斯坦拉合尔工程技术大学KSK校区, 化学聚合物与复合材料工程系 54890,巴基斯坦拉合尔工程技术大学KSK校区, 化学聚合物与复合材料工程系 54890,巴基斯坦拉合尔工程技术大学KSK校区, 化学聚合物与复合材料工程系 54890,巴基斯坦拉合尔工程技术大学KSK校区, 化学聚合物与复合材料工程系 54890,伦敦帝国理工学院化学工程与技术系, 南肯辛顿, SW7 2 AZ |
| |
| 摘 要： |
|
| 收稿时间： | 2017-09-18 |
| 修稿时间： | 2017-12-20 |
Analysis of Solvent Effect on Mechanical Properties of Poly(ether ether ketone) Using Nano-indentation |
| |
| Tanveer Iqbal,Saima Yasin,Ahmad Shakeel,Hamayoun Mahmoo,Fahad Nazir and Paul F. Luckham. Analysis of Solvent Effect on Mechanical Properties of Poly(ether ether ketone) Using Nano-indentation[J]. Chinese Journal of Chemical Physics, 2018, 31(2): 211-215 |
| |
| Authors: | Tanveer Iqbal Saima Yasin Ahmad Shakeel Hamayoun Mahmoo Fahad Nazir Paul F. Luckham |
| |
| Affiliation: | Department of Chemical, Polymer & Composite Materials Engineering, University of Engineering & Technology, Lahore, KSK Campus, 54890, Pakistan,Department of Chemical, Polymer & Composite Materials Engineering, University of Engineering & Technology, Lahore, KSK Campus, 54890, Pakistan,Department of Chemical, Polymer & Composite Materials Engineering, University of Engineering & Technology, Lahore, KSK Campus, 54890, Pakistan,Department of Chemical, Polymer & Composite Materials Engineering, University of Engineering & Technology, Lahore, KSK Campus, 54890, Pakistan,Department of Chemical, Polymer & Composite Materials Engineering, University of Engineering & Technology, Lahore, KSK Campus, 54890, Pakistan and Department of Chemical Engineering & Technology, Imperial College London, South Kensington, SW7 2 AZ, UK |
| |
| Abstract: | Poly (ether ether ketone)(PEEK) is a high-performance semi-crystalline thermoplastic polymer.Exposure of the polymeric surface to solvents can have a strong effect like softening/swelling of polymeric network or dissolution.In this study,nano-indentation analysis was performed to study the effect of acetone on the surface mechanical properties of PEEK using different exposure time.The experiments were performed with a constant loading rate (10 nm/s) to a maximum indentation displacement (1000 nm).A 30-second hold segment was included at the maximum load to account for any creep effects followed by an unloading segment to 80% unloading.The indentation hardness and the elastic modulus were computed as a continuous function of the penetration displacement in the continuous stiffness mode (CSM) indentation.The experimental data showed that the peak load decreased from ~5.2 mN to ~1.7 mN as exposure time in solvent environment increased from 0 to 18 days.The elastic modulus and the hardness of PEEK samples also displayed a decreasing trend as a function of exposure time in the solvent environment.Two empirical models were used to fit the experimental data of hardness as a function of exposure time which showed a good agreement with the experimental values. |
| |
| Keywords: | Solvent Nano-indentation Poly (ether ether ketone) Modulus Hardness |
|
| 点击此处可从《化学物理学报》浏览原始摘要信息 |
|
点击此处可从《化学物理学报》下载全文 |
|
