首页 | 本学科首页   官方微博 | 高级检索  
     

NPB厚度对异质结OLED载流子复合区域的调控
引用本文:李璐,于军胜,黎威志,李伟,蒋亚东. NPB厚度对异质结OLED载流子复合区域的调控[J]. 发光学报, 2007, 28(3): 341-344
作者姓名:李璐  于军胜  黎威志  李伟  蒋亚东
作者单位:电子科技大学,光电信息学院,电子薄膜与集成器件国家重点实验室,四川,成都,610054;电子科技大学,光电信息学院,电子薄膜与集成器件国家重点实验室,四川,成都,610054;电子科技大学,光电信息学院,电子薄膜与集成器件国家重点实验室,四川,成都,610054;电子科技大学,光电信息学院,电子薄膜与集成器件国家重点实验室,四川,成都,610054;电子科技大学,光电信息学院,电子薄膜与集成器件国家重点实验室,四川,成都,610054
基金项目:电子科技大学中青年学术带头人基金
摘    要:通过调控p型半导体N,N′-bis(naphthalen-1-y)-N,N′-bis(phenyl)benzidine(NPB)层的厚度,制备了结构为ITO/NPB/aluminum(Ⅲ)bis(2-methyl-8-quinolinato)-4-phenylphenolate(BAlq)/NPB(0~18nm)/tri-(8-hydroxyquinoline)-aluminum(Alq3)/Mg:Ag的多层有机电致发光器件.分析结果表明,在该类异质结器件中,NPB不仅可以作为空穴传输材料,在适当的厚度范围内,它还可以起到调控载流子复合区域的作用;当NPB厚度在0~18nm之间变化时,随着其厚度增加器件发光颜色可由蓝色变为绿色.通过器件发光光谱的表征可以得知,器件的载流子复合区域相应地由BAlq层转移至Alq3层.

关 键 词:有机电致发光  NPB  BAlq  Alq3  载流子复合区域
文章编号:1000-7032(2007)03-0341-04
收稿时间:2006-07-20
修稿时间:2006-07-202006-11-23

Modification Effect of NPB Film Thickness on Charge Carrier Recombination Zone of Heterostructure OLEDs
LI Lu,YU Jun-sheng,LI Wei-zhi,LI Wei,JIANG Ya-dong. Modification Effect of NPB Film Thickness on Charge Carrier Recombination Zone of Heterostructure OLEDs[J]. Chinese Journal of Luminescence, 2007, 28(3): 341-344
Authors:LI Lu  YU Jun-sheng  LI Wei-zhi  LI Wei  JIANG Ya-dong
Affiliation:School of Optoelectronic Information, State Key Laboratory of Electronic Thin Films and Integrated Devices, University of Electronic Science and Technology of China (UESTC), Chengdu 610054, China
Abstract:Organic light-emitting devices (OLEDs) have drawn a large amount of attention due to their potential to be the next generation flat-panel displays instead of current widely using liquid crystal displays (LCDs) since Tang and VanSlyke succeeded in fabricating a high efficient green light emissive OLED driven by low direct bias voltage. The mechanism for electroluminescent (EL) phenomenon involves in the injection of holes from anode and electrons from cathode under forward bias voltage, then the hole-electrons form excitons, and light emission appears through the radiative recombination of excitons. Multilayer organic light-emitting diode with the structure of indium tin oxide (ITO)/N,N′-bis(naphthalen-1-y)-N,N′-bis(phenyl)benzidine (NPB)/aluminum(Ⅲ)bis(2-methyl-8-quinolinato)-4-phenylphenolate(BAlq)/NPB(0~18nm)/tri-(8-hydroxyquinoline)-aluminum (Alq3)/Mg:Ag has been fabricated by changing the film thickness of p-type semiconductor NPB material near to Alq33 layer.
Keywords:organic light emitting diode NPB  BAlq  Alq3  recombination zone
本文献已被 CNKI 维普 万方数据 等数据库收录!
点击此处可从《发光学报》浏览原始摘要信息
点击此处可从《发光学报》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号