首页 | 本学科首页   官方微博 | 高级检索  
     检索      

采用谐波分析的直线度误差信号提取
引用本文:黄丽玲,李兴旺,王宇,王焕玲,黄富贵.采用谐波分析的直线度误差信号提取[J].华侨大学学报(自然科学版),2014,0(1):7-10.
作者姓名:黄丽玲  李兴旺  王宇  王焕玲  黄富贵
作者单位:华侨大学 机电及自动化学院, 福建 厦门 361021
基金项目:福建省自然科学基金资助项目(2012J01216)
摘    要:通过三坐标测量机上对零件平面内直线度误差的5组实验,将谐波分析的方法应用于直线度误差提取.研究结果表明:在得到的谐波分析图上无法找到直线度误差信号的最高次谐波波长成分,相关标准中建议采用的奈奎斯特采样定理无法直接用于确定直线度误差的提取点数.但是可以对直线度误差进行误差分离处理,对分离出的确定性误差采用上述谐波分析的方法,从而再依据奈奎斯特定理确定出提取点数.

关 键 词:直线度  形位误差  谐波分析  提取  奈奎斯特定理

Application of Harmonic Analysis to Extraction of Straightness Error
HUANG Li-ling;LI Xing-wang;WANG Yu;WANG Huan-ling;HUANG Fu-gui.Application of Harmonic Analysis to Extraction of Straightness Error[J].Journal of Huaqiao University(Natural Science),2014,0(1):7-10.
Authors:HUANG Li-ling;LI Xing-wang;WANG Yu;WANG Huan-ling;HUANG Fu-gui
Institution:College of Mechanical Engineering and Automation, Huaqiao University, Xiamen 361021, China
Abstract:Five groups of experiments on the straightness error in part plane were conducted by CMM. Harmonic analysis was applied to extraction of straightness error. The result shows that, the highest harmonic wavelength of the straightness error signal can not be found from harmonic diagrams. Nyquist sampling theorem which is mentioned in relevant standards can not be applied directly to determine extraction points of straightness error. However, the signal of straightness error can be separated. Extraction points of the separated deterministic error are determined by the above mentioned harmonic analysis method and Nyquist theorem.
Keywords:straightness  form and position error  harmonic analysis  extraction  Nyquist theorem
本文献已被 CNKI 等数据库收录!
点击此处可从《华侨大学学报(自然科学版)》浏览原始摘要信息
点击此处可从《华侨大学学报(自然科学版)》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号