The determination of a general time creep compliance relation of linear viscoelastic materials under constant load and its extension to nonlinear viscoelastic behavior for the Burger model

Linear viscoelastic materials yield a creep function which only depends on time if creep experiments are performed under constant stress ₀. In practice, this condition is very difficult to realize, and as a consequence, the experiments are performed under constant force. For small strains the difference between the conditions of constant stress and constant force is negligible. Otherwise, the decrease in cross-section has to be taken into account and leads to increasing stress in the course of time for creep experiments under constant load. The Boltzmann superposition principle is solved under the condition of constant load and for strains . The creep complicance C(t; ₀) defined by the ratio becomes, in principle, dependent on the initial stress ₀. As a consequence, a set of creep compliance curves cannot be approximated with a simple parameter fit. Already the application of the solution on the Burger model yields a creep compliance curve with all three creep ranges. Furthermore, the mathematical structure of the time creep compliance relation of the Burger model allows nonlinear viscoelastic extension via the introduction of the yield strength _max and a nonlinearity parameter n _l . The creep behavior of PBT and PC can be described in the range of long times up to initial stresses ₀, being 75% for PBT and 60% for PC of the yield stress _max with only two or one free fit parameter, respectively.