Kinetics and retention characteristics of some nitrophenols onto polyurethane foams

The kinetics of sorption of the nitrophenols by the unloaded polyurethane foams (PUFs) were found fast, reached equilibrium in few minutes and followed a first-order rate equation with an overall rate constant k in the range (0.16-0.21)±0.01 min⁻¹. The retention of the tested nitrophenols by the unloaded foams is consistent with the “solvent extraction” mechanism. However, the sorption also followed Langmuir, Freundlich and Dubinin-Radushkevich (D-R) isotherms. The mean free sorption energy of the nitrophenols onto the PUF was found equal to 7.5±0.4 kJ/mol, which reflects physical sorption. Thus, a dual-mode involves both absorption related to solvent extraction and an added component for surface adsorption seems a more likely sorption mechanism model. While a dual-mode sorption model explains the observed retention behavior, the data suggest that, solvent extraction plays a much larger role than the added component for surface adsorption. The sorption and recovery percentages of the nitrophenols from fresh, natural and industrial wastewater by the proposed unloaded foam columns were quantitatively achieved. The height equivalent to theoretical plates (HETP), N, the breakthrough capacity and the critical capacity for the unloaded foam columns were found in the range of (0.8-1.1)±0.6 mm, (94-132)±3, 3.2-4.02 and 1.5-2.67 mg/g, respectively. The method was successfully applied for the retention and recovery of the tested nitrophenols spiked to fresh and industrial wastewaters.