Fission product separation from seawater by electrocoagulation method

At the Fukushima Daiichi nuclear power station, seawater was urgently injected into the reactor core. Therefore a large amount of seawater containing highly radioactive fission products (FP) accumulated and its treatment has been a serious problem. FP such as Cs, Sr and I in water are generally removed by an ion exchanger such as zeolite and separated with column or chemical precipitation methods. An alternative electrocoagulation method, which efficiently separates fine particles from the liquid phase without a chemical reagent is expected to be part of a useful separation system that can reduce the amount of waste, decrease processing time and simplify the process. In this study, powdered adsorbents, such as ferrocyanide and zeolite, were added to seawater containing simulated FP, and the electrocoagulation effect with Al alloy electrodes were investigated. More than 99 % of Cs and 90 % of I were removed by potassium nickel hexacyanoferrate(II) and silver zeolite, respectively. Sedimentation was promoted by electrocoagulation and addition of an inorganic cohesion promoter further increased the sedimentation rate. Moreover, rapid dissolution reaction with heating of the aggregation substance was not observed, so the thermal risk of aqueous processing of it would be low. In addition, thermal analyses showed that the electrocoagulation process did not lead to thermal decomposition. Therefore, if the electrocoagulation method is applied to a decontamination system, it has the potential to thermally stabilize and reduce waste.