首页 | 本学科首页   官方微博 | 高级检索  
     检索      

片状放大器热恢复研究
引用本文:於海武,郑万国,王成程,贺少勃,唐军,刘勇,淳于咏梅,王琳.片状放大器热恢复研究[J].强激光与粒子束,2000,12(8).
作者姓名:於海武  郑万国  王成程  贺少勃  唐军  刘勇  淳于咏梅  王琳
作者单位:中国工程物理研究院 高温高密度等离子体物理国家重点实验室,四川 绵阳919-988信箱 621900
摘    要: 给出了神光III主放大器单元4×2×3片状放大器的热恢复研究。利用集总热容模型研究了氙灯、隔板玻璃、钕玻璃片的热恢复过程,并利用三维瞬态热传输有限元模型对钕玻璃片的三维空间温度随时间的变化过程作了详细的分析。初步的研究结果表明,通过优化的冷却方案,可以在装置预定的运行周期内将激光工作介质钕玻璃片内的温度梯度和总体平均温度冷却到可以接受的水平。

关 键 词:片状放大器  热恢复  热传输  数值模拟  神光III激光装置
收稿时间:1900-01-01;

Thermal recovery of the disk amplifiers
yu hai-wu,zheng wan-guo,wang cheng-cheng,he shao-bo,tang jun,liu yong,chunyu yong-mei,wang lin.Thermal recovery of the disk amplifiers[J].High Power Laser and Particle Beams,2000,12(8).
Authors:yu hai-wu  zheng wan-guo  wang cheng-cheng  he shao-bo  tang jun  liu yong  chunyu yong-mei  wang lin
Institution:National Key Laboratory of Laser Fusion, CAEP, P.O.Box 919-988, Mianyang 621900, China
Abstract:Thermal recovery of the 4×2×3 multi-segment amplifiers that will be used for SG III laser facility was presented. A lumped mass model was used to investigate the thermal recovery processes of the flash lamps, blast shield, and laser slab. A 3-D finite element model was used to investigate in detail the time related spatial temperature distribution of the laser slab. The preliminary calculating results indicate that, with an optimization thermal recovery, we can reduce the thermal gradient and the average temperature of the slab to an acceptable value.
Keywords:thermal recovery  heat transfer  numerical simulations  Shenguang III laser facility
点击此处可从《强激光与粒子束》浏览原始摘要信息
点击此处可从《强激光与粒子束》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号