首页 | 本学科首页   官方微博 | 高级检索  
     

高比能LiFePO4的制备及性能研究
引用本文:李军,赖桂棠,黄慧民,李大光,夏信德. 高比能LiFePO4的制备及性能研究[J]. 电化学, 2007, 13(4): 403-406
作者姓名:李军  赖桂棠  黄慧民  李大光  夏信德
作者单位:广东工业大学轻工化工学院,广东,广州,510006;广州市鹏辉电池有限公司博士后工作站,广东,广州,511483;广东工业大学轻工化工学院,广东,广州,510006;广州市鹏辉电池有限公司博士后工作站,广东,广州,511483
摘    要:应用液相沉淀法-固相烧结法制备高密度的LiFePO4/C及纯相LiFePO4.X射线衍射、扫描电镜、傅立叶红外光谱仪、电化学性能测试表明:该样品具有单一的橄榄石结构和3.4 V左右的放电平台,掺碳的LiFe-PO4具有更优良的性能,粒度较小粒径分布均匀,振实密度达1.46 g/cm3,0.1C首次放电比容量为144.6mAh/g,循环20次后容量保持率为93.2%,1C倍率首次放电比容量为133.5 mAh/g,循环20次后容量下降8.76%.

关 键 词:锂离子电池  正极材料  LiFePO4  高比能
文章编号:1006-3471(2007)04-0403-04
收稿时间:2007-05-10
修稿时间:2007-07-09

Preparation and Properties of High Capacity LiFePO4
LI Jun,LAI Gui-tang,HUANG Hui-min,LI Da-guang,XIA Xin-de. Preparation and Properties of High Capacity LiFePO4[J]. Electrochemistry, 2007, 13(4): 403-406
Authors:LI Jun  LAI Gui-tang  HUANG Hui-min  LI Da-guang  XIA Xin-de
Abstract:Carbon-doped LiFePO4/C and pure phase LilTePO4 cathode materials were prepared by liquid-state precipitation reaction. The results of XRD, SEM, elemental analysis, FTIR and A. C. impedance tests show that the samples have had olivine structure and a 3.4V discharge platform. The tapped density of LiFePO4/C sample could reach 1.46g/cm^3, the initiate discharge capacity is 144.6mAh/g at 0.1 C, which remained capacity is 93. 2% after 20 cycles. The first discharge capacity is 133.5mAh/g at 1C and the capacity decreased 8.76% after 20 cycles.
Keywords:lithium ion battery   cathode materials   lithium iron phosphate   high capacity
本文献已被 维普 万方数据 等数据库收录!
点击此处可从《电化学》浏览原始摘要信息
点击此处可从《电化学》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号