首页 | 本学科首页   官方微博 | 高级检索  
     检索      

低功耗UHF RFID标签基带处理器的ASIC实现
引用本文:朱秋玲,张春,王晓辉,刘忠奇,李永明,王志华.低功耗UHF RFID标签基带处理器的ASIC实现[J].半导体技术,2009,34(2).
作者姓名:朱秋玲  张春  王晓辉  刘忠奇  李永明  王志华
作者单位:清华大学微电子学研究所,北京,100084;清华大学微电子学研究所,北京,100084;清华大学微电子学研究所,北京,100084;清华大学微电子学研究所,北京,100084;清华大学微电子学研究所,北京,100084;清华大学微电子学研究所,北京,100084
基金项目:国家高技术研究发展计划(863计划) 
摘    要:设计并实现了一种新颖的超高频RFID标签的基带处理器.该标签以ISO/IEC 18000-6C协议为基础,但在反向链路通信方面,在原协议FM0编码/Miller调制副载波的基础上增加了扩频编码的实现,目的是提高反向链路的通信信噪比.该设计支持协议要求的所有11条强制命令的读写操作,概率/分槽防冲突算法,以及对存储器的读写操作.设计中采用了低功耗技术,显著降低了芯片的平均功耗和峰值功耗.芯片采用0.18 μm6层金属CMOS工艺进行流片,面积为0.5mm2.测试结果表明,芯片消耗功耗约为16μW,最低工作电压为1.04 V.

关 键 词:RFID标签  基带处理器  低功耗  扩频

ASIC Implementation of Low Power Baseband Processor for UHF RFID Tag
Zhu Qiuling,Zhang Chun,Wang Xiaohui,Liu Zhongqi,Li Yongming,Wang Zhihua.ASIC Implementation of Low Power Baseband Processor for UHF RFID Tag[J].Semiconductor Technology,2009,34(2).
Authors:Zhu Qiuling  Zhang Chun  Wang Xiaohui  Liu Zhongqi  Li Yongming  Wang Zhihua
Institution:Institute of Microelectronics;Tsinghua University;Beijing 100084;China
Abstract:A novel digital baseband processor of an UHF RFID tag was presented based on the ISO/IEC 18000-6 type C standard.In order to enhance the signal-noise ratio in the return link,spread spectrum technique was used in addition to the FM0 encoding/Miller sub-carrier modulation.The tag supports all the 11 mandatory commands required by the 6C standard as well as the implementation of probabilistic/slotted anti-collision scheme and read/write operation to EEPROM. Low power techniques were adopted to reduce the inst...
Keywords:RFID tag  baseband processor  low power  spread spectrum
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号