| 胶固紧平面反射镜的有限元分析 |
| |
| 引用本文： | 李福,阮萍,赵葆常,马小龙. 胶固紧平面反射镜的有限元分析[J]. 光学技术, 2006, 32(6): 896-899 |
| |
| 作者姓名： | 李福 阮萍 赵葆常 马小龙 |
| |
| 作者单位： | 中国科学院西安光学精密机械研究所,西安,710068;中国科学院研究生院,北京,100039;中国科学院西安光学精密机械研究所,西安,710068 |
| |
| 基金项目： | 国家高技术研究发展计划(863计划) |
| |
| 摘 要： | 为了研究反射镜部件中胶对系统的影响,分析了胶的有限元建模方法,即详细模型和有效模型。采用详细模型对系统进行了模态分析和均匀温升热弹性分析。通过无热化方法确定了胶的厚度,分析了不同面积的均匀圆形胶点和方形胶点对系统性能的影响。为了模拟实际情况中的不均匀点胶,对同一模型中不同直径的胶点进行了分析。分析结果表明:圆形胶点对反射镜的面形影响要比方形胶点小得多;胶点的不均匀性会造成反射镜的面形变化。
|
| 关 键 词： | 有限元分析 RTV硅橡胶 模态 面形 平面反射镜 |
| 文章编号： | 1002-1582(2006)06-0896-04 |
| 收稿时间： | 2005-10-17 |
| 修稿时间： | 2005-10-17 |
Finite element analysis of the plane mirror fastened by adhesive |
| |
| LI Fu,RUAN Ping,ZHAO Bao-chang,MA Xiao-long. Finite element analysis of the plane mirror fastened by adhesive[J]. Optical Technique, 2006, 32(6): 896-899 |
| |
| Authors: | LI Fu RUAN Ping ZHAO Bao-chang MA Xiao-long |
| |
| Abstract: | The methods of establishing adhesive finite element model-detailed model and effective model are elaborated in order to research the effect of systems with adhesive. The mode and uniform soaking thermal-elasticity are analyzed through the detailed model. The thickness of adhesive is decided by the athermal method. The different diameter uniform circle adhesive dots and the uniform square adhesive pads with different length are analyzed. The adhesive dots of the different diameter within the same model are analyzed in order to simulate nonuniform adhesive dots in practical situation. The analysis result shows that the influence of square adhesive dots is much stronger than that of circle adhesive dots,and the nonuniform distribution of the adhesive dots will cause the unnecessary surface figure changes of the mirror. |
| |
| Keywords: | finite element analysis room temperature vulcanization silicone mode surface figure plane reflector |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
