| 基于近红外远心镜头的双目瞳孔检测仪光学系统设计 |
| |
| 引用本文： | 刘志颖,高志山,付威威,袁群.基于近红外远心镜头的双目瞳孔检测仪光学系统设计[J].应用光学,2017,38(3):485-493. |
| |
| 作者姓名： | 刘志颖 高志山 付威威 袁群 |
| |
| 作者单位： | 1.南京理工大学 电子工程与光电技术学院，江苏 南京 210000 |
| |
| 基金项目： | 国家自然科学基金61377015国家自然科学基金61505080江苏省自然科学基金BK20150788 |
| |
| 摘 要： | 为了降低双目瞳孔检测系统放大率对瞳孔位置的敏感性，设计了一款基于近红外远心镜头的双目瞳孔检测仪。阐述了系统中的核心部件——近红外远心镜头光学参数的计算过程，分前后组进行设计，并运用Zemax完成光学系统优化，以全视场MTF、全视场最大畸变和物方远心度为指标对系统进行公差分析，利用标准圆对仪器进行标定，拟合出像素数和瞳孔大小的对应关系。结果表明，对于55 mm~75 mm的瞳距，瞳孔的直径测量精度可达0.05 mm，满足使用要求。
|
| 关 键 词： | 光学设计 瞳孔检测 公差分析 系统标定 |
| 收稿时间： | 2016-10-28 |
Optical system design of binocular pupil detector based onnear infrared telecentric lens |
| |
| Institution: | 1.Institute of Electrical Engineering and Photoelectric Technology, Nanjing University of Science and Technology, Nanjing 210000, China2.Suzhou Institute of Biomedical Engineering and Technology, Chinese Academy of Sciences, Suzhou 215009, China |
| |
| Abstract: | In order to reduce sensitivity of binocular pupil detection system to the pupil position, a binocular pupil detector based on near-infrared telecentric lens is designed. Calculation process of optical parameters of near-infrared telecentric lens is described. Telecentric lens is designed and optimized in different parts with Zemax.Tolerance is analyzed by MTF, maximum distortion of the whole field and object telecentricity. Finally, standard circle is used to calibrate the instrument to find out fitting correspondence between number of pixels and pupil size. Results show that pupil diameter measurement accuracy reaches 0.05 mm for interpupillary distance of 55 mm to 75 mm, which can meet the requirements. |
| |
| Keywords: | |
| 本文献已被 CNKI 等数据库收录！ |
| 点击此处可从《应用光学》浏览原始摘要信息 |
| 点击此处可从《应用光学》下载免费的PDF全文 |
|
