首页 | 本学科首页   官方微博 | 高级检索  
     检索      

Ba1-xPrxCoO3阴极材料在中温SOFC中的应用
引用本文:王金霞,姚瑛,许大鹏,苏文辉.Ba1-xPrxCoO3阴极材料在中温SOFC中的应用[J].高等学校化学学报,2007,28(11):2146-2149.
作者姓名:王金霞  姚瑛  许大鹏  苏文辉
作者单位:1. 宁波工程学院电子与信息工程学院,宁波,315016
2. 吉林大学物理学院凝聚态物理系,长春,130023
基金项目:国家自然科学基金 , 浙江省教育厅资助项目
摘    要:采用湿化学法合成系列阴极材料Ba1-xPrxCoO3(x=0.3, 0.4, 0.5, 0.6). TG-DTA和烧结曲线测试结果表明, 在950 ℃时样品发生相变, 形成了晶相. 样品的SEM结果显示, Pr离子掺杂到一定量时, 将抑制晶粒长大, 减少阴极的孔洞率. 单电池测量结果表明, 用x=0.5的阴极材料制成的单电池表现出最好的输出特性, 具有最大短路电流密度和最大输出功率密度, 是掺杂Y的BaCeO3基电解质的一种优化配比阴极材料.

关 键 词:中温固体氧化物燃料电池(IT-SOFC)  阴极  热重-差热  烧结曲线
文章编号:0251-0790(2007)11-2146-04
收稿时间:2007-03-09
修稿时间:2007-03-09

Application of Ba1-xPrxCoO3 Cathode Materials in IT-SOFC
WANG Jin-Xia,YAO Ying,XU Da-Peng,SU Wen-Hui.Application of Ba1-xPrxCoO3 Cathode Materials in IT-SOFC[J].Chemical Research In Chinese Universities,2007,28(11):2146-2149.
Authors:WANG Jin-Xia  YAO Ying  XU Da-Peng  SU Wen-Hui
Institution:1. School of Electronic and Information Engeering , Ningbo University of Technology, Ningbo 315016, China; 2. Deparment of Condensed Matter Physics, Jilin University, Changchun 130021, China
Abstract:Cathode materials Ba1-xPrxCoO3(x=0.3, 0.4, 0.5, 0.6) were prepared with wet chemical method. TG-DTA and sintering curves show that the materials were crystallized in a single perovskite phase at around 950 ℃. The SEM images show that the prohibition of the particle growth and the decrease of the hole ratio were produced when the increase of Pr ions dopant to a certain quantity. The results of the single cell tests show that the fuel cell with the cathodes x=0.5 have the best output performance and the greatest short current density and the maximum output power density, so it has more proper ratio than the other samples and fit Y3+-doped BaCeO3 based solid electrolyte material perfectly.
Keywords:IT-SOFC  Cathode  TG-DTA  Sintering Curve
本文献已被 CNKI 维普 万方数据 等数据库收录!
点击此处可从《高等学校化学学报》浏览原始摘要信息
点击此处可从《高等学校化学学报》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号