A CFD model of frost formation based on dynamic meshes technique via secondary development of ANSYS fluent |
| |
| Institution: | 1. State Key Lab. of Refractories and Metallurgy, Wuhan University of Science and Technology, Wuhan 430081, China;2. Institute of Thermal Engineering, TU Bergakademie Freiberg, Gustav-Zeuner-Str. 7, Freiberg 09599, Germany;3. National-provincial Joint Engineering Research Center of High Temperature Materials and Lining Technology, Wuhan University of Science and Technology, Wuhan 430081, China;4. Key Lab. for Ferrous Metallurgy and Resources Utilization of Ministry of Education, Wuhan University of Science and Technology, Wuhan 430081, China |
| |
| Abstract: | To simulate the non-uniform frost growth in flow direction for humid air flowing through a freezing channel, a 2D numerical frosting model based on dynamic meshes technique is developed in the current work via the secondary development of commercial ANSYS Fluent. The computation domain consists of both frost layer and humid air regions, and the local heat and vapor fluxes at the surface of frost layer are determined by numerical temperature and vapor fraction fields in the humid air region rather than by empirical correlations. The frost layer is treated as a growing packed bed with heat and mass transfer dominated by molecular diffusion, where local absorption coefficient of vapor desublimation and local vapor fraction are both determined by solving the pseudo steady vapor diffusion equation with a source term theoretically. The interface of frost layer and humid air regions is treated as two walls for the iteration of its temperature, of which the humid air side is specified with the temperature equal to the frost-side counterpart and the frost side takes the heat flux including the extra latent heat caused by vapor deposit. User-defined functions are compiled to implement the above treatments to ANSYS Fluent. Frosting experiments in the literature are simulated with the current model for validation. How the profile of frost layer evolves with time in the frosting process is explored. The contours and profiles of velocity, temperature and vapor fraction are presented to discuss the effects of heat and mass transfer on frost formation. Numerical results demonstrate that the proposed CFD model can predict the frost growth and densification with a relative deviation less than 5% compared with experiments. Besides, the computation load of current model is small due to no solution of complex multiphase flow. In addition, dynamic meshes help current model to capture the interface of frost layer and humid air regions accurately. |
| |
| Keywords: | Frost formation Dynamic mesh technique Heat and mass transfer Frost profile evolution Secondary development ANSYS fluent |
| 本文献已被 ScienceDirect 等数据库收录！ |
|
