Potassium enolates of N,N‐dialkylamides as initiators of anionic polymerization

Stable potassium enolates of N,N‐diethylacetamide α‐potassio‐N,N‐diethylacetamide ( 1 )], N,N‐diethylpropionamide α‐potassio‐N,N‐diethylpropionamide ( 2 )], and N,N‐diethylisobutyramide α‐potassio‐N,N‐diethylisobutyramide ( 3 )] were prepared by the proton abstraction of the corresponding N,N‐diethylamides with diphenylmethylpotassium (Ph₂CHK) or potassium naphthalenide in THF. The relative nucleophilicity of 1 – 3 was estimated to be in the order of 1 < 3 < 2 from the results of the alkylation reaction with methyl iodide. N,N‐diethylacetamide transferred its α‐proton to 2 quantitatively in THF at 0 °C, whereas no reaction occurred between N,N‐diethylisobutyramide and 2 ; this indicated the relative basicity to be 1 < 2 ～ 3 . Anionic polymerizations of N,N‐diethylacrylamide (DEA) and methyl methacrylate were quantitatively initiated with 2 in THF at ?78 °C, whereas the initiation efficiencies of 2 for styrene and 2‐vinylpyridine were about 2 and 67%, respectively. The initiation of DEA with 1 – 3 at ?78 or 0 °C in THF gave poly (DEA)s having broad molecular weight distributions (MWDs; M_w/M_n = 2) and ill‐controlled molecular weights. In contrast, poly(DEA)s of narrow MWDs (M_w/M_n < 1.2) and predicted M_n's were obtained with 2 in the presence of diethylzinc (Et₂Zn) at ?78 °C, whereas the initiations with 1 /Et₂Zn and 3 /Et₂Zn at ?78 °C resulted in poor control of the molecular weights. At the higher temperature of 0 °C, all the binary initiator systems ( 1 – 3 /Et₂Zn) induced controlled polymerizations of DEA in terms of the conversion, molecular weight, and MWD. The poly(DEA)s produced with 1 – 3 /Et₂Zn at 0 °C showed mr‐rich configurations (mr = 76–89%), as observed for the poly(DEA) generated with Ph₂CHK/Et₂Zn. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1260–1271, 2007