Effect of sample dimensions,lubrication and deformation rate on uniaxial compression of gelatin gels

The response of 10% gelatin gels to uniaxial compression is determined in part by frictional effects at the gel-platen interface. By using teflon-coated plates, lubricated with paraffin or silicone oil, these frictional effects are effectively eliminated. The stress-strain response can then be described by the two-constant Mooney-Rivlin relation, the sum of the two parameters (C₁ +C₂) being about 25% lower in lubricated compression than the value obtained in simple shear and torsion. Cross-head speed (for total testing times of 0.2–3 min) had no effect on material response, but long-term stress relaxation does occur over periods of about 30 min and longer. Sample radius did not affect the response in lubricated compression but had a major effect under unlubricated conditions. No systematic change in response was seen with sample diameter to height (aspect) ratios between 9.6 and 3.1 in lubricated compression, but data scatter for a given sample diameter was worst at the lowest heights (highest aspect ratio). Agreement of all true stress versus strain data was within about ± 7% regardless of sample height or deformation rate.