Effect of Organic Loading Rate and Fill Time on the Biohydrogen Production in a Mechanically Stirred AnSBBR Treating Synthetic Sucrose-Based Wastewater

This study investigated the feasibility to produce biohydrogen of a mechanically stirred anaerobic sequencing batch biofilm reactor (AnSBBR) treating sucrose-based synthetic wastewater. The bioreactor performance (30 °C) was evaluated as to the combined effect of fill time (2, 1.5, and 1 h), cycle length (4, 3, and 2 h), influent concentration (3,500 and 5,250 mg chemical oxygen demand (COD)?L^?1) and applied volumetric organic load (AVOL_CT from 9.0 to 27.0 g COD L^?1 d^?1). AVOLs were varied according to influent concentration and cycle length (t _C). The results showed that increasing AVOL_CT resulted in a decrease in sucrose removal from 99 to 86 % and in improvement of molar yield per removed load (MYRL_S.n) from 1.02 mol H₂?mol carbohydrate^?1 at AVOL_CT of 9.0 g COD L^?1 d^?1 to maximum value of 1.48 mol H₂?mol carbohydrate^?1, at AVOL_CT of 18.0 g COD L^?1 d^?1, with subsequent decrease. Increasing AVOL_CT improved the daily molar productivity of hydrogen (MPr) from 15.28 to 49.22 mol H₂?m^?3 d^?1. The highest daily specific molar productivity of hydrogen (SMPr) obtained was 8.71 mol H₂?kg TVS^?1 d^?1 at an AVOL_CT of 18.0 g COD L^?1 d^?1. Decreasing t _C from 4 to 3 h decreased sucrose removal, increased MPr, and improved SMPr. Increasing influent concentration decreased sucrose removal only at t _C of 2 h, improved MYRL_S,n and MPr at all t _C, and also improved SMPr at t _C of 4 and 3 h. Feeding strategy had a significant effect on biohydrogen production; increasing fill time improved sucrose removal, MPr, SMPr, and MYRL_S,n for all investigated AVOL_CT. At all operational conditions, the main intermediate metabolic was acetic acid followed by ethanol, butyric, and propionic acids. Increasing fill time resulted in a decrease in ethanol concentration.