Analytical procedures for improved trace element detection limits in polar ice from Arctic Canada using ICP-SMS

Analytical procedures have been developed for the reliable determination of 19 trace elements (Ag, Al, Ba, Bi, Cd, Co, Cr, Cu, Fe, Mn, Pb, Rb, Sb, Sc, Sr, Tl, U, V, Zn) in ice samples at pg g^?1 and fg g^?1 concentrations using ICP-sector field mass spectrometry (ICP-SMS). Concentrations of most elements in the high purity water and doubly distilled HNO₃ employed were distinctly lower than previously reported values. The accuracy of the results was carefully evaluated using the certified water reference material SLRS-4. Contributions of unwanted trace elements due to acidification of the ice samples (0.5% HNO₃) to the total element budget amounted to only 0.001 pg g^?1 for Bi, 0.34 pg g^?1 for Cr, 0.2 pg g^?1 for Fe, 0.004 pg g^?1 for Pb, 0.00015 pg g^?1 for U and 0.0025 pg g^?1 for V: compared to the concentrations of the metals in ice these are negligible. The use of a detergent (0.05%) in the rinsing solution (0.5% HNO₃), helped to reduce memory effects by 59–98%, depending on the element considered; this resulted in shorter washing times between samples (i.e. 1 min) and improved analysis time. Adopting strict clean room procedures, the detection limit for Pb (0.06 pg g^?1) is a factor of ten lower than the current state-of-the-art. Compared to previous studies, the improved LODs obtained here for other trace elements amount to 2× (Ag), 4× (Sb), 5× (Ba), 6× (Cu, Mn, U), 9× (Bi), 13× (Cd), 18× (Fe) and 21× (V). The developed analytical protocols were successfully applied to the determination of selected trace elements in age-dated ice samples from the Canadian High Arctic. The toxic trace element Tl (median: 0.16 pg g^?1; range: 0.03–1.32 pg g^?1) and the lithogenic reference element Sc (0.53 pg g^?1; 0.06–2.9 pg g^?1) have been determined in a polar ice core for the first time.