|
|||||
|
|
| 成膜条件对聚醚砜超滤膜性能和结构的影响 | |
| 引用本文： | 姚亮,王丽红,李德玲,沈玉龙,杨振秀.成膜条件对聚醚砜超滤膜性能和结构的影响[J].化学研究与应用,2008,20(10). |
| 作者姓名： | 姚亮 王丽红 李德玲 沈玉龙 杨振秀 |
| 作者单位： | 1. 河北大学化学与环境科学学院,河北,保定,071002 2. 唐山师范学院化学系,河北,唐山,063000 3. 河北大学化学与环境科学学院,河北,保定,071002;唐山师范学院化学系,河北,唐山,063000 |
| 基金项目： | 河北省科学技术研究与发展计划，唐山师范学院科学研究基金 |
| 摘 要： | 以聚醚砜(PES)为膜材,聚乙二醇600(PEG600)为添加剂,N,N-二甲基甲酰胺(DMF)为溶剂,纯水为凝固浴,用相转化法制备聚醚砜超滤膜.详细探讨了PES浓度、添加剂含量、凝固浴温度对膜性能和结构的影响规律,确定了制备高水通量、高截留率聚醚砜超滤膜的最佳工艺条件. |
| 关 键 词： | 聚醚砜 聚乙二醇 膜性能和结构 |
Influence of membrane-forming parameters on the performance and structure of polyethersulfone ultrafiltration membrane |
|
| YAO Liang,WANG Li-hong,LI De-ling,SHEN Yu-long,YANG Zhen-xiu.Influence of membrane-forming parameters on the performance and structure of polyethersulfone ultrafiltration membrane[J].Chemical Research and Application,2008,20(10). | |
| Authors: | YAO Liang WANG Li-hong LI De-ling SHEN Yu-long YANG Zhen-xiu |
| Abstract: | Flat ultrafiltration membrane of Polyethersulfone(PES) was successfully prepared by means of phase inversion method,with PES as raw material,polyethylene glycol 600(PEG600) as additive,N,N-dimethylformamide(DMF) as solvent and pure water as coagulation bath.The influence of PES concentration,PEG content and bath temperature on membrane performance and structure was discussed in detail.Based on the experiment results,the optimum conditions for preparing ultrafiltration membrane with high water flux and high rejection rate were determined. |
| Keywords: | polyethersulfone polyethylene glycol 600 membrane performance and structure |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ | |