Long-Range Processing Correlation and Morphological Fractality of Compatibilized Blends of PS/ HDPE/ SEBS Block Copolymer |
| |
Authors: | ?elimir Jel?i? Nina Vranje? Vesna Rek |
| |
Institution: | 1. PLIVA Croatia Ltd., TAPI R&D, Prilaz baruna Filipovi?a 29, HR10000 Zagreb, Croatia;2. Faculty of Chemical Engineering and Technology, University of Zagreb, Maruli?ev trg 19, HR10000 Zagreb, Croatia |
| |
Abstract: | Summary: Processing and compatibilization effects of a commercially available styrene/ ethylene-butylene/ styrene (SEBS) compatibilizer on the morphological structure, rheological and mechanical properties of blends of polystyrene (PS) and high density polyethylene (HDPE) were investigated. The rheological behaviour of the blends melt during processing was followed by measuring torque; extrusion capacity output and melts back-pressure in a twin screw extruder. The processing parameters were decreased with the HDPE content. The results show that SEBS compatibilizer can yield compatibilization by substantially reducing torque and increasing the back-pressure. However, the Hurst indices of melt processing parameters are increased with compatibilization. Near-infrared spectra had been described by the Hurst index HNIR which is then related to HDPE content in the blends. The correlation between the blend compositions, morphological structure, mechanical and rheological properties and processing parameters was established and discussed on base of correlation with the fractal indices obtained from the SEM microphotographs of PS/HDPE/SEBS blends. |
| |
Keywords: | fractal Hurst index mechanical properties morphology processing PS/HDPE/SEBS blends rheological properties structure |
|
|