Plastic deformation of polypropylene. IV. Wide-angle x-ray scattering in the neck region

Wide-angle x-ray scattering (WAXS) patterns of two polypropylene samples, a quenched sample drawn at 21°C and an annealed sample drawn at 100°C, were investigated in a range of values of draw ratio λ very closely spaced through the neck region. In both cases, a range of small λ where deformation occurred by spherulite deformation was followed by one of higher λ where microfibrils were formed. The contribution to the WAXS pattern of microfibrils could be clearly distinguished from that of deformed spherulites because of the better orientation parallel to the draw direction of the former as compared to the latter. Additionally, for a drawing temperature of 21°C, microfibrils crystallize in the “smectic” phase as compared to the monoclinic phase for the initial sample and deformed spherulites. At this temperature, plastic deformation proceeds through the spherulite deformation mechanism up to λ = 1.4 accompanied by an increase in chain orientation with increasing λ. For λ > 1.4 plastic deformation appears to occur exclusively through microfibril formation. For drawing at 100°C, spherulite deformation is accompanied by very little change in chain orientation up to λ = 2, where microfibril formation begins. For λ > 2 (T_d = 100°C) plastic deformation is accompanied by both microfibril formation and some spherulite deformation as reflected by changes in both orientation and crystallite size. At this temperature the lateral crystallite size in the microfibrils is related to the long period according to the “equilibrium crystallite shape” previously found for annealed polypropylene.