带有纵向涡发生器的翅片管的流动与传热数值研究 |
| |
引用本文: | 鹿世化,李奇贺.带有纵向涡发生器的翅片管的流动与传热数值研究[J].低温与超导,2010,38(4). |
| |
作者姓名: | 鹿世化 李奇贺 |
| |
作者单位: | 南京师范大学动力工程学院,南京,210042 |
| |
摘 要: | 用三维数值的研究方法对带有纵向涡发生器的翅片管流动和传热进行了数值研究。研究发现,使用了45°冲角的矩形小翼纵向涡发生器可以使得翅片管的传热增加10.4-24.6%,同时相应的压力损失增加30.5-57.2%。研究了不同的冲角(a=30,45,60)对于管翅间换热和流动的影响,结果显示冲角为30°时效果最好。
|
关 键 词: | 纵向涡 强化传热 数值模拟 |
Numerical analysis of fin-and-tube heat exchanger with longitudinal vortex generators |
| |
Abstract: | Heat transfer characteristics and fluid flow structure of fin-and-tube heat exchanger with longitudinal vortex generators(LVGs) were studied numerically.The effect of Reynolds number(from 700 to 2000),the attack angle(30°,45°and60°)of rectangular winglet were examined.It was found that the average heat transfer coefficient for the four-row fin-and-tube heat exchanger with LVGs increases by 10.4-24.6% over the baseline case and the corresponding pressure loss increased by 30.4-57.2%.In addition,the heat transfer enhancement of rectangular winglet with the attack angle of 30°is more obvious than other two angles. |
| |
Keywords: | Longitudinal Vortex Generators(LVGs) Heat transfer enhancement Numerical simulation |
本文献已被 CNKI 万方数据 等数据库收录! |
|