MSC1210电源控制器的程序优化

为了解决兰州重离子研究装置( HIRFL ) 电源控制系统中的MSC1210 控制模块在调束过程中出现的各种故障，对其主芯片程序进行了优化设计。首先介绍了控制器的各种故障现象，分析了形成原因，然后制定了详细的设计方案，最后采用了以状态机为基础的指令接收过程、带校验机制的通信方式及远程指令复位等方法进行程序优化。实验室测试和现场使用结果表明，优化后的控制器运行稳定可靠，满足加速器的需求。The MSC1210 control module is one of the most important power supply controllers of Heavy Ion Research Facility in Lanzhou ( HIRFL ), but there are several problems during beam tuning. In order to deal with the problems,the main chip’s program was redesigned. In this paper we introduced the controller’s fault phenomena, and analyzed the reasons; then scheduled the optimized program in detail. Several methods were employed to improve the system performance, including instruction receiving process which is based on state machine, the communication mode with parity mechanism, and the remote instruction reset method. Both laboratory and commissioning tests indicate that the optimized controller is stable and reliable, and meet the operation requirement of HIRFL.

Optimized Program of MSC1210 Power Supply Controller

The MSC1210 control module is one of the most important power supply controllers of Heavy Ion Research Facility in Lanzhou ( HIRFL ), but there are several problems during beam tuning. In order to deal with the problems,the main chip’s program was redesigned. In this paper we introduced the controller’s fault phenomena, and analyzed the reasons; then scheduled the optimized program in detail. Several methods were employed to improve the system performance, including instruction receiving process which is based on state machine, the communication mode with parity mechanism, and the remote instruction reset method. Both laboratory and commissioning tests indicate that the optimized controller is stable and reliable, and meet the operation requirement of HIRFL.