四边型弯张换能器特性研究及宽带设计 |
| |
引用本文: | 李宽,蓝宇,周天放.四边型弯张换能器特性研究及宽带设计[J].声学学报,2016,41(6):843-850. |
| |
作者姓名: | 李宽 蓝宇 周天放 |
| |
作者单位: | 1 哈尔滨工程大学 水声技术重点实验室 哈尔滨 150001; |
| |
基金项目: | 国家自然科学基金项目(11374073)资助 |
| |
摘 要: | 四边型弯张换能器通常工作带宽较窄,为了提高带宽性能,对四边型弯张换能器振动及辐射特性进行了研究,重点分析壳体结构参数对换能器发送电压响应的影响。根据分析结果提出了拓宽换能器工作带宽的方法,利用有限元软件进行了仿真计算并制作了四边型弯张换能器样机。测量得到在2.4~5 kHz的频率范围内,换能器的最大发送电压响应值达到140 dB,带内起伏4 dB,有限元仿真结果与实验结果吻合较好。研究结果表明设计的四边型弯张换能器不仅能够低频工作,并且可以在小尺寸下实现大功率发射,同时还具备宽带发射特性。
|
收稿时间: | 2015-03-25 |
Characteristics research and broadband design of four-sided type flextensional transducer |
| |
Institution: | 1 Science and Technology on Underwater Acoustic Laboratory, Harbin Engineering University Harbin 150001;2 College of Underwater Acoustic Engineering, Harbin Engineering University Harbin 150001;3. CETC Ocean Information Co., Ltd. Beijing 100041 |
| |
Abstract: | The working bandwidth of four-sided type flextensional transducer is usually narrow, and for improving bandwidth capability, vibration and radiation characteristics of the four-sided flextensional transducer are discussed, and influence from shell structure parameters to transmitting voltage response is analyzed emphatically. According to the analysis results, a bandwidth realization method is proposed. Then simulation calculation is carried out with finite element software, and a prototype of four-sided type flextensional transducer is developed. The transmitting voltage response of the transducer gets to 140 dB with fluctuation less than 4 dB from 2.4 kHz to 5 kHz. The finite element simulation and experimental results are in good agreement. It is proved that the designed four-sided type flextensional transducer not only can work in low frequency, but also may transmit high power in small size. In addition, the four-sided type fiextensional transducer owns broadband transmission characteristic. |
| |
Keywords: | |
本文献已被 CNKI 等数据库收录! |
| 点击此处可从《声学学报》浏览原始摘要信息 |
| 点击此处可从《声学学报》下载免费的PDF全文 |
|