| 自动切割机桥形工作台的误差分析 |
| |
| 引用本文： | 胡章坤,秦江,杨树文,吕荣华.自动切割机桥形工作台的误差分析[J].电子工业专用设备,2010,39(10):15-19. |
| |
| 作者姓名： | 胡章坤 秦江 杨树文 吕荣华 |
| |
| 作者单位： | 1. 中国电子科技集团公司第四十五研究所,北京,101601;北京中电科电子装备有限公司,北京,100176
2. 中国电子科技集团公司第四十五研究所,北京,101601 |
| |
| 摘 要： | 以自动切割机桥形工作台为研究对象,针对其高精度要求,通过对其结构的具体分析,系统并详尽地对三轴桥形工作台的各种误差源进行了分析计算;通过高斯公式计算出各驱动轴定位精度误差;介绍了桥形工作台定位精度的测量方法,对理论结果与实测结果进行了分析比较,验证了误差分析结果的正确性,为高精度桥形工作台的设计提供参考。
|
| 关 键 词： | 三轴桥形工作台 误差分析 自动切割机 |
Error Analysis on the Bridge-type Worktable of Dicing Saw |
| |
| HU Zhangkun,QIN Jiang,YANG Shuwen,LV Ronghua.Error Analysis on the Bridge-type Worktable of Dicing Saw[J].Equipment for Electronic Products Marufacturing,2010,39(10):15-19. |
| |
| Authors: | HU Zhangkun QIN Jiang YANG Shuwen LV Ronghua |
| |
| Institution: | HU Zhangkun1.2,QIN Jiang1.2,YANG Shuwen1.2,LV Ronghua1(1.The 45th Institute of CETC,Beijing 101601 2.CETC Beijing Electronic Equipment CO.,LTD,Beijing 100176) |
| |
| Abstract: | In this paper,dicing saw's bridge-type worktable is object of study,for its high accuracy requirements,through the analysis of its structure,Systematic and detailed on the worktable of the various error sources are analyzed and calculated;by Gauss formula calculated the position error of each axis;presented the measurement of the worktable positioning accuracy,theoretical results and experimental results are analyzed and compared,verified the correctness of the error analysis,provided a reference for the de... |
| |
| Keywords: | Three-axis bridge-type worktable Error analysis Automatic dicing saw |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
