大麻中3种酚类成分测定专用固相萃取柱的设计与应用

大麻中的主要成分大麻二酚(CBD)、大麻酚(CBN)和 Δ9-四氢大麻酚(Δ9-THC)的含量决定了其性质和应用.在液相色谱分析中,由于大麻提取液中含有较多杂质,需要净化.该文基于大麻中CBD、CBN和 Δ9-THC的结构特征及样品基质组成,根据中性氧化铝、硅酸镁和石墨化炭黑的不同表面特征,考察了这3种吸附剂对大麻提取...

Design and application of special solid phase extraction column for three cannabinol compounds in hemp

Cannabidiol (CBD), cannabinol (CBN), and Δ9-tetrahydrocannabinol (THC) are the most important components of hemp, whose concentrations determine the properties and applications of hemp. Hemp contains a large number of impurities, which must be removed from the extracting solution before determining the cannabinol contents by ultra-high performance liquid chromatography (UHPLC). Neutral alumina, magnesium silicate, and graphitized carbon black have different surface characteristics when used as adsorbents. The removal rates of pigments, total sugar, total fatty acid glyceride, and metal ions as well as the recoveries of the three cannabinols in the extraction solution were evaluated. The amounts of neutral alumina, magnesium silicate, and graphitized carbon black were 1.80 g, 0.15 g, and 0.05 g, respectively. The three adsorbents were mixed well and packed into a polypropylene pipe to prepare a special 2 g/6 mL solid phase extraction (SPE) column for determining the three cannabinol compounds in hemp. The chemical components of the hemp flowers and leaves were extracted with an ethyl acetate/methanol (9∶1, v/v) mixture. After the extracting solution was allowed to pass through the SPE column, the recoveries of CBD, CBN, and Δ9-THC were 98.9%, 95.7%, and 99.2%, respectively. The removal rates of xanthophyll, chlorophyll a, and chlorophyll were 96.3%, 99.2%, and 95.5%, respectively. The removal rates of total sugar, total fatty glyceride, and metal ions were 98.5%, 96.9%, and 85.4%, respectively. In this study, the chromatographic conditions for analyzing the three cannabinol compounds were optimized. The cannabinol compounds were separated within 10 min on an Eclipse Plus C18 column (50 mm×2.1 mm, 1.8 μm) using a mobile phase consisting of 1% (v/v) acetic acid and acetonitrile (30∶70, v/v) at a flow rate of 0.5 mL/min. The detection wavelength was set at 210 nm with a diode array detector, and the sample injection volume was 1 μL. Good linear relationships were observed between the mass peak areas and mass concentrations of CBD, CBN, and Δ9-THC in the range of 0.5-50 mg/L. The corresponding correlation coefficients (R²) were 0.9983, 0.9995, and 0.9981, while the detection limits were 0.45 μg/L, 0.53 μg/L, and 0.38 μg/L. The recoveries of CBD, CBN, and Δ9-THC were 90.3%-96.9%, 93.7%-95.6%, and 90.8%-96.1%, with relative standard deviations (RSDs) of 2.2%-6.1%, 4.1%-8.0%, and 2.4%-4.8%, respectively. The results were satisfactory, demonstrating that the special SPE column made of neutral alumina, magnesium silicate, and graphitized carbon black was well suited for the determination of the three cannabinol compounds in hemp.