Fe39.4－xCo40Si9B9Nb2.6Cux纳米晶合金的有效磁各向异性研究

采用多晶材料趋近饱和定律研究了非晶Fe_39.4-xCo₄₀Si₉B₉Nb_2.6Cu_x(x=0.5,1,1.5) 合金在不同温度纳米晶化后的有效磁各向异性常数〈K〉.结果表明， Cu含量较低(x=0.5)时，纳米晶粒较大并且在较低的退火温度(550℃)下析出硬磁相，〈K〉随退火温度T_a升高显著增加；随着Cu含量的增加，有效地细化了晶粒，并且抑制了硼化物的析出，〈K〉明显减小.讨论了〈K〉与晶粒尺寸D及初始磁导率的关系.关键词：纳米晶有效磁各向异性磁导率FeCo基合金

The effective magnetic anisotropy of nanocrystalline Fe39.4 - x Co40 Si9 B9 Nb2.6 Cu x alloys

The effective magnetic anisotropy of nanocrystalline Fe_39.4-xCo₄₀Si₉B₉Nb_2.6Cu_x alloysHan Xian-Tang1) Wang Zhi1) Ma Xiao-Hua1) Wang Guang-Jian2)The effective magnetic anisotropy 〈K〉 of nanocrystalline Fe_39.4-xCo₄₀Si₉B₉Nb_2.6Cu_x(x=0.5,1,1.5) alloys annealed at different temperatures was investigated based on the law of approach to saturation at room temperature. The experimental results showed that the grain size D of samples with low content of Cu (x=0.5) is larger and a hard magnetic phase precipitated from the residual amorphous matrix at lower annealing temperature which lead to a higher value of 〈K〉. And with increasing content of Cu, which effectively refined the grains and retarded the formation of borides at x≥1,a clear drop tendency of 〈K〉 was observed. The correlation between 〈K〉 and D as well as 〈K〉 and initial permeability μ_i was also discussed.