Platinum-catalyst-assisted metalorganic vapor phase epitaxy of InN

This paper reports the first attempt of the Pt-catalyst-assisted MOVPE growth of InN. In order to enhance NH₃ decomposition at a relatively low growth temperature (～550 °C), Pt is used as a catalyst. The catalyst is installed in the NH₃ introduction tube in the MOVPE reactor and the tube is located just above the susceptor to be heated. Compared with InN films grown without the catalyst, the samples grown with Pt catalyst show improved electrical properties; a carrier concentration in the order of 10¹⁸ cm^?3 and a Hall mobility as high as 1350 cm²/Vs are obtained. The crystalline quality is also improved by employing the catalyst and a tilt fluctuation as low as 8.6 arcmin is obtained for a sample grown on a GaN/sapphire template. It is confirmed that for InN films grown at 550 °C with Pt catalyst, the electrical and crystallographic properties are also improved with increase in thickness. These results indicate that the growth at around 550 °C with the Pt catalyst is performed under the circumstances where NH₃ is effectively decomposed, whereas the deterioration of InN during growth is significantly suppressed.