首页 | 本学科首页   官方微博 | 高级检索  
     检索      

利用ADC测量皮秒量级时钟抖动大小及分布
引用本文:吴义华,杨俊峰,王砚方,邓美彩.利用ADC测量皮秒量级时钟抖动大小及分布[J].江苏大学学报(自然科学版),2006,27(3):254-257.
作者姓名:吴义华  杨俊峰  王砚方  邓美彩
作者单位:中国科学技术大学,近代物理系,安徽,合肥,230026;中国科学技术大学,近代物理系,安徽,合肥,230026;中国科学技术大学,近代物理系,安徽,合肥,230026;中国科学技术大学,近代物理系,安徽,合肥,230026
基金项目:国家高技术研究发展计划(863计划)
摘    要:研究了时钟抖动与正弦信号的采样序列之间的关系,并在正弦信号参数估计法的基础上,提出一种利用ADC采样测量皮秒量级的时钟抖动大小和分布的新方法.同时,还从理论上分析了参数估计误差和信号幅度噪声对测量时钟抖动的影响,并进行了仿真验证.结果表明,采用参数估计测量法测量时钟抖动,不但能够准确地测出抖动的大小,而且能够测出抖动的分布.

关 键 词:数据转换  时钟抖动  ADC  参数估计  采样  仿真
文章编号:1671-7775(2006)03-0254-04
修稿时间:2005年11月11

Measurement of clock jitter and distribution with pico-second resolution using ADC
WU Yi-hua,YANG Jun-feng,WANG Yan-fang,DENG Mei-cai.Measurement of clock jitter and distribution with pico-second resolution using ADC[J].Journal of Jiangsu University:Natural Science Edition,2006,27(3):254-257.
Authors:WU Yi-hua  YANG Jun-feng  WANG Yan-fang  DENG Mei-cai
Abstract:The relationship between the clock jitter and the sampling sequence of a sine wave is studied,and a new method to measure the jitter and distribution of a clock signal with pico-second resolution is proposed using ADC sampling based on estimating method of the parameters in sine signal.At the same time,the influence of the parameter-estimating error and the noise on amplitude of the signal are discussed,and simulation was performed to validate the analysis result.The result shows that the parameterestimating method can measure not only the value of jitter,but also its distribution.
Keywords:ADC
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号